Now showing items 181-200 of 732

    • MS90295 REV A REINST NOTICE 2 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1997
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • MIL-B-51176F 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1988
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This document covers butyl rubber boots, with steel safety toes, designed for wear over stockings. Intended Use: Type I boots are intended for use as components of the M5 protective outfit. Type II boots are ...
      Subject(s) : Boots , Chemical protective , Footwear , Toxicological agents protective ,
    • MIL-C-10922G 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1985
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • MIL-C-3031J (1) 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1987
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • MIL-R-45804/3 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1975
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for procuring the tool and accessory roll described herein shall consist of this document ...
    • MIL-PRF-44466D 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;2006
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers one type of heater for use by mounted troops that will heat rations, water for beverages and for limited personal hygiene (see 6.1).Intended Use: The HWR is intended for use by mounted ...
      Subject(s) : 24/28Volt DC power source , Heat rations , Heat water , Hygiene , Meal , Ready-to-Eat (MRE) , Mounted troops , Track vehicle ,
    • PPP-P-25F 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1976
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers the packaging, packing, and marking of stationery paper and printing papers for shipment and storage.
      The following documents, of the issues in effect on date of invitation for bids or request ...
    • MIL-T-6361D VALID NOTICE 1 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1990
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • MIL-PRF-44494A VALID NOTICE 1 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;2011
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers the performance and acceptance requirements for two non-powered, liquid and solid fuel burning, radiant space heaters, and accessories.Intended Use: The Type I and Type II heaters ...
      Subject(s) : Coal , Diesel , JP-8 , Tent heating , Wood ,
    • MIL-C-40602B 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1967
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers one type of electric-motor-operated cookie cutting machine. Intended Use: The cookie-cutting machine covered by this specification is intended for use in Military bakeries to cut ...
    • MIL-S-40626D 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1994
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers one type and size of vehicle class sign kit.Intended Use: The vehicle class sign kit is used to afford irmiediate recognition of the weight classification of each vehicle and as an ...
    • MIL-P-608K 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1991
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This document covers one type of tent pole section and tent pole adapter. Intended Use: The tent pole sections are intended for use with Tent, Shelter Half, MIL-T-3725. The tent pole sections and tent pole ...
      Subject(s) : Adjuster , Shaft part , Wood and metal ,
    • MIL-C-44043B 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1990
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers water-repellent lightweight nylon ballistic cloth having a specified minimum ballistic resistance.
      The cloth shall be of the following classes as specified (see 6.2).
         ...
      Subject(s) : Armored clothing , Body armor , Bullet protection , Fragment protection , Helmets ,
    • MIL-B-44381 NOTICE 1 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1998
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
    • A-A-50127A 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1990
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: The General Services Administration has authorized the use of this Commercial Item Description Intended Use: The cam action ascenders are rope gripping devices used to aid in pulling oneself up a rope, and ...
    • MIL-L-43704 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1970
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers the requirements for chrome tanned, full grain and burnished full grain cattlehide upper leather. Intended Use: The cattlehide is intended for use as upper leather in men's oxford ...
    • MIL-L-43541 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1967
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers the requirements for vinyl finished, embossed, corrected grain, cattlehide leather (see 6.1). Intended Use: The leather covered by this specification is intended for use in ...
    • MIL-C-43103D 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1988
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This document covers one type of plastic water canteen having a capacity of one quart nominal. Intended Use: The canteen is intended primarily for use in temperate and tropical environments by individual ...
      Subject(s) : Canteen , Individual equipment , Water ,
    • MIL-W-44049A 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1989
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers materials and construction of various types of polypropylene webbing and tape woven on shuttleless looms or shuttle looms. Intended Use: The webbing and tape is intended for use as ...
      Subject(s) : Clothing , Equipage , Manufacture , Tentage , Textile fabrics ,
    • MIL-D-19645A 

      Type: standard
      Source: ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center:;1957
      Organization : ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center
      Abstract: This specification covers mechanically refrigerated display cases for storing and dispensing salads and desserts for Naval shipboard use.