درباره ما
ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center: Recent submissions
Now showing items 281-300 of 732
-
AA-C-31E
Abstract: This specification covers single and double door storage and wardrobe cabinets, which are equipped with locks. Intended Use: Type I cabinets are primarily intended for the storage of office forms and supplies. ... -
MIL-C-12369F
Abstract: This specification covers nylon ballistic cloth having a specified minimum ballistic resistance.
The cloth shall be of the following classes as specified:Class 1 - Natural or dyed, untreated Class ...
-
A-A-52210
Abstract: This commercial item description (CID) covers a 36 inch long machinists\' and toolmakers\' straightedge, not graduated, semi-hard, with one edge beveled and one edge square, for general machine shops. Intended ... -
MIL-HDBK-154B
Abstract: This handbook establishes guidelines for fresh fruit and vegetable farms and packing sheds in oversea areas furnishing locally grown fresh fruits and vegetables to the US Armed Forces.
This handbook is applicable to ... -
FED-STD-5F
Abstract: This standard covers the basic instructions and conditions for obtaining the necessary identification and supply data, usually from government suppliers, prior to or at the time of procurement, when procurement of such ... -
MIL-L-40069D
Abstract: This specification covers chrome tanned cattlehide leather (see 6.1). Intended Use: Class 2 leather is intended for use in clothing and equipage used under cold climate conditions. Class 1 leather is ... -
A-A-59833
Abstract: This commercial item description covers the requirements for pitons which are used for protecting climbers on steep rock routes by placing the pitons into cracks in the rock. -
MIL-P-500H
Abstract: This document covers six types of tent peak and ridge plates. Intended Use: The ridge and peak plates are intended for use at the ridge and peak of various tents.Subject(s) : Plates , tent peak , Plates , tent ridge , -
MIL-C-44270
Abstract: This document covers requirements for three types of polyester/cotton blend cloth (see 6.1).
The cloth shall be of the following types (as specified, see 6.2):Type I - 3.0 oz/sq yd, ...
Subject(s) : Cloth , Hospital Duty Uniform (HDU) , Polyester/cotton , -
A-A-50162
Abstract: Intended Use: The cloth is intended for use in the manufacturing of clothing and equipage items. The gray green cloth is used for medical clothing. -
MIL-F-3501C
Abstract: This specification covers prepared breading and batter mixes to be used as a breading or batter for deep-fat frying of foods for the Armed Forces.
The product shall be of the following types, as specified (see ... -
MIL-T-43182D
Abstract: This specification covers four different frame-supported tents for sheltering console, maintenance test shop, aft radar and front radar assemblies of the Hawk Missile System. Intended Use: The tents are ...Subject(s) : Frame supported , PAR , Radar , Shelter , -
MIL-F-44251A
Abstract: This specification covers the frame sections of an extendable frame type personnel modular tent with covers. Intended Use: The frame sections are intended for use in the TEMPER TENT as Structural, Extendable ...Subject(s) : End sections , Extendable door sections , Extendable sections , Sections with arch assemblies , TEMPER ,