MIL-N-11151C

NUT RUNNER AND SCREWDRIVERS, ELECTRIC

contributor author	ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center
date accessioned	2017-09-04T15:51:17Z
date available	2017-09-04T15:51:17Z
date copyright	05/09/1962
date issued	1962
identifier other	QJLJDAAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std/handle/yse/54420
description abstract	This specification covers electric nut runner and screwdrivers for tightening nuts, screws and bolts to operate selected, uniform torque (see 6.1). Intended Use: The nut runner and screwdriver described in this specification is intended for use in assembly and disassembly operations involving the tightening or loosening of nuts, screws, and bolts of sizes specified in table I. Proper torque setting is obtained by use of a torque measuring machine. Torque setting may also be accomplished by adjusting the nut runner so that loosening torque (measured by a hand torque wrench) is the same for an assembly tightened by the nut runner as when tightened by a hand torque wrench. The nut runner is furnished in three sizes as shown in figure 1.
language	English
title	MIL-N-11151C	num
title	NUT RUNNER AND SCREWDRIVERS, ELECTRIC	en
type	standard
page	10
status	Active
tree	ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;1962
contenttype	fulltext