MIL-A-52194A

ADHESIVE, EPOXY (FOR BONDING GLASS REINFORCED POLYESTER)

contributor author	ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center
date accessioned	2017-09-04T15:57:45Z
date available	2017-09-04T15:57:45Z
date copyright	01/16/1967
date issued	1967
identifier other	RBHODAAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std/handle/yse/61059
description abstract	This specification covers the requirements for a two-part, epoxy-based adhesive, suitable for bonding glass-reinforced polyester where no peel or cleavage is anticipated.Intended Use: This specification was prepared to cover material for bonding the two halves of plastic gunstocks. The adhesive is intended for use in applications where its paste consistency is necessary (a) to prevent adhesive drain-off during cure, or (b) to bond adherend surfaces that are not plane. The adhesive is not intended for use where service temperatures exceed 200° F. The properties required by this specification apply only to reproducible material and should not be used as design data.
language	English
title	MIL-A-52194A	num
title	ADHESIVE, EPOXY (FOR BONDING GLASS REINFORCED POLYESTER)	en
type	standard
page	11
status	Active
tree	ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;1967
contenttype	fulltext