Now showing items 1-18 of 18

      • A-A-55748 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;1995
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This commercial item description covers manually carried, hand-operated-compression insecticide sprayers. The sprayers are intended for manual spraying of insecticides and fungicides.
      • A-A-55748 VALID NOTICE 1 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2000
        Organization : DLA - GS7 - DLA Aviation - Richmond
      • A-A-55748 VALID NOTICE 2 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2006
        Organization : DLA - GS7 - DLA Aviation - Richmond
      • MIL-STD-1525B VALID NOTICE 1 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2007
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This standard establishes the verification tests for parachute materials (subcontracted supplies) used in the fabrication of parachutes. These tests are for the purpose of confirming subcontractor test reports, determining ...
      • MIL-DTL-17376/1A 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2007
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: Intended Use: The cylinder caps covered by the specification sheet and threaded to mated flanges attached to the necks of compressed gas cylinders are intended to afford protection against damage to cylinder ...
      • MIL-DTL-17376F 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2007
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This specification covers protection caps and mounting flanges for compressed-gas cylinder valves. Intended Use: The caps and flanges covered by this specification protect cylinder valves against damage in ...
      • RR-C-901E 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2010
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This specification provides the acquisition requirements for the purchase of empty compressed gas cylinders to be used for storage, transportation, and distribution of high pressure liquefied and gaseous industrial and ...
        Subject(s) : ABO , acetylene , argon , boron , butane , carbon dioxide , ethane , ethylene , helium , hexaflouroethane , hydrogen , isobutane , medical , methane , neon , nitrogen , nitrous oxide , nonshatterable , oxygen , sufur hexaflouride ,
      • MIL-DTL-2/16D CANC NOTICE 1 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2010
        Organization : DLA - GS7 - DLA Aviation - Richmond
      • MIL-STD-1411B 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2010
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This standard defines the requirements and procedures for the inspection, maintenance, and charging of government-owned cylinders by gas suppliers. This standard is intended to assure that the cylinders are serviced to ...
        Subject(s) : acetylene , air , ammonia , argon , brazed , carbon dioxide , carbon monoxide , chlorine , cryogenic , drawn seamless , fiberglass , flourocarbon refrigerant , fuel gas mix , helium , hydrogen , hydrostatic , medical , methyl bromide , nitrogen , nonshatterable , oxygen , propane , sulfur hexaflouride , ultrasonic , welded ,
      • MIL-DTL-3701F 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2010
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This specification covers new steel cylinders, with applicable valves and caps, intended for acetylene service.Intended Use: DOT-8 and DOT-8AL compressed gas cylinders are intended for use in the transportation ...
        Subject(s) : Acetone , Cap , Flange , Porous filling , Saturation ,
      • A-A-59666B 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2010
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This commercial item description (CID) provides the acquisition requirements for the purchase of empty compressed gas cylinders to be used for storage, transportation, and distribution of low pressure liquefied compressed ...
        Subject(s) : Aluminum , Fire extinguishing , Liquefied , Petroleum , Refrigerant , Steel ,
      • MIL-DTL-11732F 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2010
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This specification covers four types of steel cylinders, with valve and cap, intended for chlorine service.Intended Use: These cylinders are intended for use in the shipment and storage of chlorine. These ...
        Subject(s) : Bottom coating , Calcium sulfonate , Cap , Flange , Footring , Methyl bromide , National Gas Taper , Tare weight , Valve ,
      • MIL-DTL-2/11D CANC NOTICE 1 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2010
        Organization : DLA - GS7 - DLA Aviation - Richmond
      • A-A-59860 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2010
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This commercial item description (CID) provides the acquisition requirements for the purchase of cylinder valves for use with compressed gas cylinders containing liquefied or non-liquefied compressed gases or mixtures.
        Subject(s) : Compression packed , Diaphragm seal , Dip tube , Eductor tube , Fusible plug , Inlet , Medical , O-ring , Outlet , Pressure relief device , Rupture disk ,
      • MIL-DTL-17376/2B 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2012
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: Intended Use: The flanges covered by this specification sheet are intended to provide anchorage for a cylinder protective cap to the shoulder of a cylinder. The flanges are attached to the cylinder by welding ...
      • MIL-DTL-17376/3B 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2012
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: Intended Use: The flanges covered by this specification sheet are intended to provide anchorage on the shoulders of high pressure cylinders for cylinder caps to provide protection for the cylinder valve against ...
      • MIL-DTL-17376F VALID NOTICE 1 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2012
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: This specification covers protection caps and mounting flanges for compressed-gas cylinder valves. Intended Use: The caps and flanges covered by this specification protect cylinder valves against damage in ...
      • MIL-DTL-17376/1A VALID NOTICE 1 

        Type: standard
        Source: DLA - GS7 - DLA Aviation - Richmond:;2012
        Organization : DLA - GS7 - DLA Aviation - Richmond
        Abstract: Intended Use: The cylinder caps covered by the specification sheet and threaded to mated flanges attached to the necks of compressed gas cylinders are intended to afford protection against damage to cylinder ...