NATO - North Atlantic Treaty Organization
Browse by
Recent Submissions
-
NATO STANAG 4050
Abstract: The aim of this agreement is to standardize symbols for designating the function of controls in military vehicles. -
NATO AEP-59
Abstract: This AEP provides for the determination of airfield pavement condition through visual surveys using the Pavement Condition Index (PCI) method of quantifying pavement condition
The values stated in SI units are to be ... -
NATO STANAG 3756
Abstract: Scope:
The agreement is to standardise connections in on-base and off-base facilities and equipment, including fixed fuel installations, field fuel installations, vehicles and ... -
NATO EXTAC 1012
Abstract: Multinational force ships must be prepared to conduct MIF operations of short notice. In support of this objective, guidance provided herein is applicable to all naval commands that may be involved in the planning and/or ... -
NATO STANAG 4090
Abstract: AIM
The aim of this agreement is to standardize the design of small arms ammunition (9 mm Parabellum) for use by the NATO Armed Forces, to ensure functional interchangeability of this ammunition on the battlefield. -
NATO STANAG 3899
Abstract: AIM
The aim of this agreement is to provide a standardized set of criteria to define acceptable fit of aircraft stores on aircraft, and a test method for determining the fit compatibility of the stores. -
NATO STANAG 4248
Abstract: AIM
The aim of this Agreement is to facilitate the provision of purified water for submarine main lead acid batteries of participating NATO Navies in NATO Naval Bases. -
NATO STANAG 4193 PT 3
Abstract: AIM
The aim of this Agreement is to define and standardize essential technical characteristics which shall be incorporated in the design of the IFF Mk XA and Mk XII Interrogators and Transponders. -
NATO STANAG 2068
Abstract: AIM
The aim of this agreement is to:
a. Standardize the general principles of the initial care of war-wounded and provide standard medical measures.
b. Provide a guide for the medical services which may be ... -
NATO STANAG 3469
Abstract: AIM
The aim of this agreement is to establish common characteristics for parachute extraction assemblies and aircraft extraction parachute ejector installation. -
NATO STANAG 2953
Abstract: AIM
The aim of this agreement is to register national acceptance of AOP-2 (C). -
NATO STANAG 4357
Abstract: Scope:
THE AIM OF THIS AGREEMENT IS TO REGISTER NATIONAL ACCEPTANCE OF ALLIED VEHICLE TESTING PUBLICATIONS (AVTPS). -
NATO STANAG 1040
Abstract: AIM
The aim of this NATO standardization agreement (STANAG) is to respond to the following interoperability requirement. -
NATO STANAG 4009 P4
Abstract: This standard will apply to all new procurement semi-trailers of a gross weight from 22 to 72 ton (48,400-160,000 lb) of the transport wheeled tactical and general service classes intended for the Armed Forces of the North ... -
NATO STANAG 4698
Abstract: AIM
The aim of this agreement is to register national acceptance of the series of Allied Engineering Publications (AEP) listed in the Annex A, for the selection and application of protective paint systems based ... -
NATO AEP-28
Abstract: This Allied Engineering Publication gives advice for national design criteria and for national operation instructions of mobile electrical Land Systems when interconnection to equipment of other nations is required to ... -
NATO STANAG 3624
Abstract: Scope:
The aim of this agreement is to standardize the characteristics of gaseous and liquid nitrogen; its supply pressure, hoses, couplings, and other equipment for cross-servicing ... -
NATO STANAG 1278
Abstract: The aim of this agreement is to establish minimum standard requirements of coefficient of friction in order to reduce the possibility of aircraft sliding on flight decks.