درباره ما
FF-S-92B
SCREW, MACHINE: SLOTTED, CROSS-RECESSED OR HEXAGON HEAD
| contributor author | ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center | |
| date accessioned | 2017-09-04T16:32:15Z | |
| date available | 2017-09-04T16:32:15Z | |
| date copyright | 08/27/1974 | |
| date issued | 1974 | |
| identifier other | BPMTDAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std/handle/yse/95645 | |
| description abstract | This specification covers slotted, cross-recessed and hexagon head machine screws. Machine screws shall be of the following types and styles (see 6.2). Type I - Slotted (see fig. 1) Style 1s - Round head Style 6s - Oval head, 82° Style 2s - Flat head, 82° Style 7s Truss head Style 3s - Flat head, 100° Style 8s - Binding head Style 4s - Fillister head Style 9s - Pan head Style 5s - Fillister head, Style 10s - Hexagon head drilled Type II - Hexagon, Plain (see fig. 1) Style 10p - Hexagon Type III - Cross-Recessed, Recess Designs I and II (see fig. 2). Style 1c - Round head Style 6c - Oval head, 82° Style 2c - Flat head, 82° Style 7c Truss head Style 3c - Flat head, 100° Style 8c - Binding head Style 4c - Fillister head Style 9c - Pan head NOTE: Use of cross-recess design II is not recommended. Machine screws shall be classified according to size by the nominal diameter of the body. Intended Use: Machine screws are intended to be used in the assembling of parts in relation to each other, either permanently or temporarily. | |
| language | English | |
| title | FF-S-92B | num |
| title | SCREW, MACHINE: SLOTTED, CROSS-RECESSED OR HEXAGON HEAD | en |
| type | standard | |
| page | 12 | |
| status | Active | |
| tree | ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;1974 | |
| contenttype | fulltext |
