IEEE - The Institute of Electrical and Electronics Engineers, Inc.: Recent submissions

Now showing items 121-140 of 2832

    • IEEE Standard for Blockchain Service Capability Evaluation 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A blockchain service capability model, including four levels--basic, expansion, optimization and leading, which are indicated by I, II, III, and IV, respectively, from low to high--is established by this document. At the ...
      Subject(s) : service capability evaluation , blockchains , IEEE 3230.03(TM) ,

    • IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers Amendment 1: Cold Start of Power Transformers filled with Natural Ester Liquids 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The amendment recommends Cold start methods of power transformers filled with 1 natural ester liquids are recommended in this amendment.
      Subject(s) : natural ester liquids , cold start , IEEE C57.93(TM) , IEEE C57.93a(TM) , power transformers ,

    • IEEE Standard for Levitation System of Electromagnetic Suspension-type Maglev Vehicles 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The document specifies the service conditions, system structure, function requirements, performance requirements, test rules, and test methods for the levitation system of Electromagnetic Suspension (EMS) -type vehicle.
      Subject(s) : IEEE 3351(TM) , landing , levitation unit , suspending , levitation controller , levitation system ,

    • IEEE Standard for Design Tests and Specifications for High-Voltage (> 1000 V) Fuses and Accessories 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Required procedures for performing design tests for high-voltage fuses, as well as for fuse disconnecting switches, are specified. These design tests, as appropriate to a particular device, include the following test types: ...
      Subject(s) : fuse accessories , fuse disconnecting switches , IEEE C37.41(TM) , fuse-enclosure package , fuse design tests , high-voltage fuses , FEP ,

    • IEEE Standard for Technical Requirements and Evaluation Methods for Intelligent Levels of Smart Home Devices 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: With the development of artificial intelligence technology, the performance of smart home devices has been significantly improved. With the boom in new products, the market is still lacking specifications and evaluation ...
      Subject(s) : coordination capabilities , special skills , cognition capabilities , motion capabilities , perception capabilities , smart home device , foundational capabilities , IEEE 2951(TM) , artificial intelligence , security ,

    • IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Direction and methods for qualifying permanent connections used for substation grounding are provided in this standard. This standard particularly addresses the connection used within the grid system, the connection used ...
      Subject(s) : current loop cycle , conductor , conductor combination , permanent connection , connection thermal capacity , grid system , control conductor , connection , grounding connection , grounding , IEEE 837 (TM) , equalizer ,

    • IEEE Standard for Blockchain Access Control 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The technical framework and technical requirements of blockchain access control, including the subject, object, and access control policy of each layer of the blockchain is specified in this standard.
      Subject(s) : IEEE 3201 , access control , blockchain ,

    • IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: An overview to the family of IEEE 802® standards is provided in this standard. It describes the reference models for the IEEE 802 standards and explains the relationship of these standards to the higher layer protocols; ...
      Subject(s) : local area networks , personal area networks , regional area networks , BANs , EtherTypes , protocol types , IEEE 802 reference model , IEEE 802 architecture , MANs , RANs , protocol identifiers , LANs , metropolitan area networks , object identifiers , body area networks , PANs , IEEE 802 ,

    • IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications A 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This amendment defines standardized modifications to both the IEEE Std 802.11 physical layers (PHY) and the Medium Access Control Layer (MAC) that enable at least one mode of operation capable of supporting a maximum ...
      Subject(s) : EHT , physical layer , IEEE 802.11be(TM) , wireless local area network , IEEE 802.11(TM) , latency , PHY , MAC , IEEE 802.11bh(TM) , WLAN , jitter , extremely high throughput , medium access control ,

    • IEEE Recommended Practice for Power Quality Data Interchange Format (PQDIF) 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A file format suitable for exchanging power quality-related measurement and simulation data in a vendor-independent manner is defined in this recommended practice. The format is designed to represent all power quality ...
      Subject(s) : power quality , data interchange , measurement , PQDI , monitoring , IEEE 1159.3(TM) , file format ,

    • IEEE Guide for the Design and Installation of Cable Systems in Substations - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The design, installation, and protection of wire and cable systems in substations are covered in this guide, with the objective of minimizing cable failures and their consequences.
      Subject(s) : pulling tension , communication cable , raceway , power cable , routing , transient protection , fiber-optic cable , service conditions , separation of redundant cable , electrical segregation , cable installation , handling , acceptance testing , cable selection , substation , cable , recommended maintenance , IEEE 525 ,

    • IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems - Redline 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Safe and reliable methods for the electrical protection of telecommunication facilities serving electric supply locations through the use of optical fiber systems for the entire facility are presented in this standard.
      Subject(s) : IEEE 487.2™ , fiber optic systems , optical fiber systems , high-voltage environment , electric power stations , ground potential rise , electrical protection , electric supply locations ,

    • IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers 250 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 480/240 V and Below 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: Certain electrical, dimensional, and mechanical characteristics are covered in this standard, and certain safety features of single-phase, 60-Hz, liquid-filled, self-cooled, pad-mounted, compartmental-type distribution ...
      Subject(s) : distribution transformers , transformer , IEEE C57.12.38(TM) , padmounted , single-phase , single phase , pad-mounted ,

    • IEEE Guide for Large-Scale Financial Risk Management Models 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This guide aims to establish a standardized reference framework and technical protocols for implementing large-scale artificial intelligence (AI) models in financial risk management. It serves as an essential guidance for ...
      Subject(s) : financial risk management , large-scale financial risk management models , fine-tuning , pre-training , swift adaptation , iteration. ,

    • IEEE Standard for Joint Calibration Framework of Multiple Roadside Sensors 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: A joint calibration framework for roadside sensors—such as camera, Light Detection and Ranging (LiDAR), millimeter-wave radio detection and ranging (radar), and fused sensors— is defined by this standard. The types of ...
      Subject(s) : roadside sensors , calibration , IEEE 3184.1(TM) , camera , radar , LiDAR ,

    • IEEE/IEC International Standard - Bushings for DC Application 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: This content has been transferred from the main text, since today's predominant bushing technology does not suffer from flashover during conditions of uneven wetting, in comparison to the earlier used ceramic insulators. ...
      Subject(s) : Positive Polarity , Insulation Level , Repeat Testing , DC Voltage , Rated Voltage , Partial Discharge , Root Mean Square Values , Skin Depth , Flashover , Dc Side , Contact Wire , Operating Conditions , Serial Number , Fundamental Frequency , General Requirements , Wettability Test , High Voltage , Dc Resistance , Current Harmonics , Routine Testing , Test Voltage , Analytical Methods , Calculation Of Coefficient , Harmonic Frequencies , Measure Of Capacity , Ac Resistance , Continuous Voltage , Minimum Distance , IEEE Standard , Correction Coefficient , Harmonic Content , Composite Insulators , Test Method , Harmonic Spectrum , Transformative Power , Normal Reference , Finite Element Method , Alternating Current , Operation And Maintenance , Distance Calculation , Atmospheric Conditions , Thermal Test , Atmospheric Pressure , Example Of Calculation ,

    • IEEE Guide for Terminology and Classification of Electric Vehicle Charging Robots 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The key terms and definitions for electric vehicle charging robots provided by this standard, which also proposes a general classification based on mobility and presents specific examples of robots for each type, are ...
      Subject(s) : electric vehicle charging robot , classification , IEEE 3345™ , terminology ,

    • IEEE Guide for the Selection of Neutral-Grounding Devices for High-Voltage Direct Current (HVDC) Converter Transformers 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The applications, selection principles, technical requirements, and test requirements for dry type and liquid-immersed neutral-grounding devices used with high-voltage direct current (HVDC) converter transformers are ...
      Subject(s) : neutral-grounding devices , short-circuit currents , high-voltage direct current (HVDC) converter transformers , insulation level , IEEE C57.32.10 , reactors ,

    • IEEE Trial-Use Recommended Practice for Passive Intermodulation Test Methods for Wireless Systems in Low-Noise Environments 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: The recommended practice is applicable to the intermodulation (IM) level measurement of passive RF and microwave components, which can be caused by the presence of two or more transmitting signals. The conduct measurement ...
      Subject(s) : wave absorber , antenna , shielding enclosure , IEEE 2717(TM) , radiation measurement , PIM ,

    • IEEE Standard for Data Access Management for Identity Relationships 

      Type: standard
      Source: IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2025
      Organization : IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Publisher: IEEE - The Institute of Electrical and Electronics Engineers, Inc.
      Abstract: In an increasingly connected digital environment, the management of identity relationships between users, artificial intelligence systems, smart devices, and sensors has become critical. The standard provides a comprehensive ...
      Subject(s) : data access management , identity , IEEE 3812.2(TM) , identity relationship ,