درباره ما
TIA TIA-455-31-C
FOTP-31 Proof Testing Optical Fibers by Tension
Organization:
TIA - Telecommunications Industry Association
Year: 2013
Abstract: INTRODUCTION
This test method describes procedures for briefly applying a specified tensile load to continuous lengths of all Class I and Class IV, glass/giass optical fibers. This FOTP should not be applied to Class II (glass/plastic) and Class III (all-plastic) fibers.
This method is intended to ensure a minimum strength for fiber that survives proof testing. The minimum strength is a key parameter for determining the minimum survival time at loads less than the minimum strength.
This method is intended to ensure a minimum strength for fiber that survives proof testing.
This test method describes procedures for briefly applying a specified tensile load to continuous lengths of all Class I and Class IV, glass/giass optical fibers. This FOTP should not be applied to Class II (glass/plastic) and Class III (all-plastic) fibers.
This method is intended to ensure a minimum strength for fiber that survives proof testing. The minimum strength is a key parameter for determining the minimum survival time at loads less than the minimum strength.
This method is intended to ensure a minimum strength for fiber that survives proof testing.
Collections
:
-
Statistics
TIA TIA-455-31-C
Show full item record
| contributor author | TIA - Telecommunications Industry Association | |
| date accessioned | 2017-09-04T17:26:04Z | |
| date available | 2017-09-04T17:26:04Z | |
| date copyright | 09/21/1994 (R 2013) | |
| date issued | 2013 | |
| identifier other | CJGZFFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsein=autho17/handle/yse/149201 | |
| description abstract | INTRODUCTION This test method describes procedures for briefly applying a specified tensile load to continuous lengths of all Class I and Class IV, glass/giass optical fibers. This FOTP should not be applied to Class II (glass/plastic) and Class III (all-plastic) fibers. This method is intended to ensure a minimum strength for fiber that survives proof testing. The minimum strength is a key parameter for determining the minimum survival time at loads less than the minimum strength. This method is intended to ensure a minimum strength for fiber that survives proof testing. | |
| language | English | |
| title | TIA TIA-455-31-C | num |
| title | FOTP-31 Proof Testing Optical Fibers by Tension | en |
| type | standard | |
| page | 24 | |
| status | Active | |
| tree | TIA - Telecommunications Industry Association:;2013 | |
| contenttype | fulltext |