درباره ما
ACI - American Concrete Institute: Recent submissions
Now showing items 121-140 of 636
-
ACI 207.3R
Abstract: This report focuses on practices used to evaluate concrete in existing massive structures. Design considerations, evaluation of existing operating records and past inspection reports, condition surveys, maintenance reports, ... -
-
ACI SP-322
Abstract: Preface The use of Fiber-reinforced polymer (FRP) composite materials in new construction and repair of concrete structures has been growing rapidly in recent years. FRP provides options and benefits not available using ... -
ACI ITG-10R
Abstract: This guide covers both currently available and emerging alternative cements, and is intended to aid people interested in using alternative cements in a project. A brief summary of each of the alternative cement technologies ... -
-
ACI 440.2R
Abstract: This document provides guidance for the selection, design, and installation of FRP systems for externally strengthening concrete structures. Information on material properties, design, installation, quality control, and ... -
ACI SP-324
Abstract: Preface This SP is the result of two technical sessions held during the 2017 ACI Spring Convention in Detroit, MI. Via presentations and the resulting collection of papers, it was the ... -
ACI 550.5
Abstract: This standard shall apply to precast concrete diaphragms and collectors that are part of the seismic-forceresisting system in structures assigned to SDC C, D, E, or F. It is permissible to use this standard for the design ... -
ACI 447R
Abstract: This design guide applies to slabs of both uniform and nonuniform thicknesses, including drop caps and drop panels, except where noted in the text. This guide does not apply to waffle slabs, or the beams of beam-and-slab ... -
ACI SP-323
Abstract: Preface Load testing of concrete bridges is a practice with a long history. Historically, and particularly before the unification of design and construction practices through codes, load ... -
-
ACI 365.1R
Abstract: This report begins with an overview of important factors controlling the service life of concrete, including past and current design of structures; concrete materials issues; field practices involved with placing, ... -
ACI 311.7
Abstract: Services specified—This specification sets the minimum requirements for quality assurance inspection of concrete construction whenever inspection services are required by the local building codes or the Contract ... -
ACI SP-315
Abstract: The Strip Model describes a load path for the transfer of vertical shear between a slab and column. The model is easily adapted to design but its application to the analysis of specimens tested under combined shear and ... -
-
ACI SP-321
Abstract: INTRODUCTION Because of constraints in space and available loading, punching of slabs is typically studied with slab-column connections (ASCE-ACI Task Committee 426, 1974). This type of test setup reflects the situation ... -
ACI 330.2R
Abstract: This guide is based on the current knowledge and practices for the design, construction, and maintenance of concrete site pavements for industrial and trucking facilities, emphasizing the aspects of concrete pavement ... -
ACI 315R
Abstract: This guide provides general and specific information, as well as illustrative design details that are required for steelreinforced concrete members such as slabs, beams, and columns. The importance of this information is ... -
ACI 232.2R
Abstract: The scope of this report is to describe the use and characterization of fly ash, its properties, and its impacts on concrete properties. Guidance is provided concerning specifications, quality assurance, and quality control ... -