درباره ما
JSA JIS S 3027 AMD 2
Oil burning bath boilers with water heaters for domestic use (Amendment 2)
Organization:
JSA - Japanese Standards Association
Year: 2011
Abstract: This Standard specifies the bath boilers fueled by kerosene, gas oil or heavy oil with a fuel consumption1) of 70 kW or less and a heat exchanger capacity2) of 50 L or less (hereafter referred to as "bath boilers"). However, the fuel consumption of the burner directly heating the heat exchange for bath boiler shall not be more than 39 kW.
Notes 1) The fuel consumption means a value of burning amount at the maximum burning indicated in the unit per hour, and if there are two or more burners, by the total of them.
2) Heat exchanger capacity is the volume of the water from the inlet to the outlet of the water channel, i.e. the total sum of water volume in hot-water supply path and bath boiler path.
The hot-water supply path is the channel through which the warm water is taken for hot-water supply and the bath boiler path is the channel through which the warm water is taken for bath boiler.
Notes 1) The fuel consumption means a value of burning amount at the maximum burning indicated in the unit per hour, and if there are two or more burners, by the total of them.
2) Heat exchanger capacity is the volume of the water from the inlet to the outlet of the water channel, i.e. the total sum of water volume in hot-water supply path and bath boiler path.
The hot-water supply path is the channel through which the warm water is taken for hot-water supply and the bath boiler path is the channel through which the warm water is taken for bath boiler.
Collections
:
-
Statistics
JSA JIS S 3027 AMD 2
Show full item record
| contributor author | JSA - Japanese Standards Association | |
| date accessioned | 2017-09-04T18:47:31Z | |
| date available | 2017-09-04T18:47:31Z | |
| date copyright | 2011.03.22 | |
| date issued | 2011 | |
| identifier other | KMCTMEAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsein=author:%22NAVY%20-%20YD%20-%20Naval%20Facilities%177ngineering%20Command%226EFDEC9FCD/handle/yse/228670 | |
| description abstract | This Standard specifies the bath boilers fueled by kerosene, gas oil or heavy oil with a fuel consumption1) of 70 kW or less and a heat exchanger capacity2) of 50 L or less (hereafter referred to as "bath boilers"). However, the fuel consumption of the burner directly heating the heat exchange for bath boiler shall not be more than 39 kW. Notes 1) The fuel consumption means a value of burning amount at the maximum burning indicated in the unit per hour, and if there are two or more burners, by the total of them. 2) Heat exchanger capacity is the volume of the water from the inlet to the outlet of the water channel, i.e. the total sum of water volume in hot-water supply path and bath boiler path. The hot-water supply path is the channel through which the warm water is taken for hot-water supply and the bath boiler path is the channel through which the warm water is taken for bath boiler. | |
| language | English | |
| title | JSA JIS S 3027 AMD 2 | num |
| title | Oil burning bath boilers with water heaters for domestic use (Amendment 2) | en |
| type | standard | |
| page | 5 | |
| status | Active | |
| tree | JSA - Japanese Standards Association:;2011 | |
| contenttype | fulltext |