MIL-C-85144C

Abstract

This specification establishes the requirements for manufacture and acceptance of the Control Section, Guided Missile, referred to herein as the "assembly". <br>The following control section configurations are covered by this specification. </span><pre> Type I: WCU-5/B, Drawing 917AS6200-1 and 2. Type II: WCU-5A/B, Drawing 917AS6200-3, WCU-5B/B, Drawing 917AS9074, or WCU-5C/B, Drawing 917AS9868.</pre> <br> <strong>Beneficial comments (recommendations, additions, deletions) and any pertinent data which maybe of use in improving this document should be addressed to: Commanding Officer, Naval Air Engineering Center, Systems Engineering and Standardization Department (SESD), Code 93, Lakehurst, NJ 08733, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.</strong> <br>Control sections described by this specification are of the following classes, depending on the level of procurement. <br>a. Class I: Control sections fabricated for procurement at the missile guidance set level. <br>b. Class II: Control sections fabricated for procurement at the control section level (see <a>3.1.2</a>). <br><b><u>Intended Use:</u></b> The control section is Intended for use in the AIM/RIM-7M guided missile. <br>