MIL-C-85144C

NAVY - AS - Naval Air Systems Command

CONTROL SECTION, GUIDED MISSILE FOR AIM/RIM-7M, GUIDED MISSILE

Organization:

Year: 1986

Abstract: This specification establishes the requirements for manufacture and acceptance of the Control Section, Guided Missile, referred to herein as the "assembly".
The following control section configurations are covered by this specification.

     Type I:                WCU-5/B, Drawing 917AS6200-1 and 2.       Type II:               WCU-5A/B, Drawing 917AS6200-3, WCU-5B/B,                             Drawing 917AS9074, or WCU-5C/B,                             Drawing 917AS9868.

Beneficial comments (recommendations, additions, deletions) and any pertinent data which maybe of use in improving this document should be addressed to: Commanding Officer, Naval Air Engineering Center, Systems Engineering and Standardization Department (SESD), Code 93, Lakehurst, NJ 08733, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
Control sections described by this specification are of the following classes, depending on the level of procurement.
a. Class I: Control sections fabricated for procurement at the missile guidance set level.
b. Class II: Control sections fabricated for procurement at the control section level (see 3.1.2).
Intended Use: The control section is Intended for use in the AIM/RIM-7M guided missile.

URI: http://yse.yabesh.ir/std;jsery=autho162s7D8308/handle/yse/189133

Subject: AC to DC converter

Collections :

NAVY - AS - Naval Air Systems Command

Show full item record

contributor author	NAVY - AS - Naval Air Systems Command
date accessioned	2017-09-04T18:06:14Z
date available	2017-09-04T18:06:14Z
date copyright	31707
date issued	1986
identifier other	GLQPDAAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std;jsery=autho162s7D8308/handle/yse/189133
description abstract	This specification establishes the requirements for manufacture and acceptance of the Control Section, Guided Missile, referred to herein as the "assembly". The following control section configurations are covered by this specification. Type I: WCU-5/B, Drawing 917AS6200-1 and 2. Type II: WCU-5A/B, Drawing 917AS6200-3, WCU-5B/B, Drawing 917AS9074, or WCU-5C/B, Drawing 917AS9868. Beneficial comments (recommendations, additions, deletions) and any pertinent data which maybe of use in improving this document should be addressed to: Commanding Officer, Naval Air Engineering Center, Systems Engineering and Standardization Department (SESD), Code 93, Lakehurst, NJ 08733, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Control sections described by this specification are of the following classes, depending on the level of procurement. a. Class I: Control sections fabricated for procurement at the missile guidance set level. b. Class II: Control sections fabricated for procurement at the control section level (see 3.1.2). Intended Use: The control section is Intended for use in the AIM/RIM-7M guided missile.
language	English
title	MIL-C-85144C	num
title	CONTROL SECTION, GUIDED MISSILE FOR AIM/RIM-7M, GUIDED MISSILE	en
type	standard
page	46
status	Active
tree	NAVY - AS - Naval Air Systems Command:;1986
contenttype	fulltext
subject keywords	AC to DC converter
subject keywords	Accumulator
subject keywords	Autopilot
subject keywords	Craft gyro assembly
subject keywords	Flow valve assembly
subject keywords	Hydraulic control section
subject keywords	Missile tune converter