درباره ما
NACE 10A392
Effectiveness of Cathodic Protection on Thermally Insulated Underground Metallic Structures - Item No. 24156
Organization:
NACE - NACE International
Year: 2006
Abstract: Foreword
The present trend in establishing an effective level of external metallic surface corrosion control is the application of a barrier coating or adhesive on the metallic surface prior to the application of a thermal insulating material. Experience has shown that there is generally a limited beneficial effect from the application of cathodic protection (CP) to a bare or ineffectively coated metallic surface under thermal insulation.
This NACE technical committee report was prepared as an information guide for external corrosion control of thermally insulated underground metallic surfaces and considerations of the effectiveness of CP. This report is intended for those dealing with thermally insulated structures or pipelines.
Although pipelines are the primary focus of this report, the principles discussed would be applicable when a thermal insulating material has been applied on or in the immediate proximity of an underground metallic surface. This report was originally prepared in 1992 by NACE Task Group (TG) T-10A-19, a component of Unit Committee T-10A on Cathodic Protection and was reaffirmed with editorial changes in 2006 by Specific Technology Group (STG) 35 on Pipelines, Tanks, and Well Casings. It is published by NACE under the auspices of STG 35.
The present trend in establishing an effective level of external metallic surface corrosion control is the application of a barrier coating or adhesive on the metallic surface prior to the application of a thermal insulating material. Experience has shown that there is generally a limited beneficial effect from the application of cathodic protection (CP) to a bare or ineffectively coated metallic surface under thermal insulation.
This NACE technical committee report was prepared as an information guide for external corrosion control of thermally insulated underground metallic surfaces and considerations of the effectiveness of CP. This report is intended for those dealing with thermally insulated structures or pipelines.
Although pipelines are the primary focus of this report, the principles discussed would be applicable when a thermal insulating material has been applied on or in the immediate proximity of an underground metallic surface. This report was originally prepared in 1992 by NACE Task Group (TG) T-10A-19, a component of Unit Committee T-10A on Cathodic Protection and was reaffirmed with editorial changes in 2006 by Specific Technology Group (STG) 35 on Pipelines, Tanks, and Well Casings. It is published by NACE under the auspices of STG 35.
Collections
:
Show full item record
| contributor author | NACE - NACE International | |
| date accessioned | 2017-09-04T17:41:16Z | |
| date available | 2017-09-04T17:41:16Z | |
| date copyright | 2006.01.01 | |
| date issued | 2006 | |
| identifier other | DXLDACAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsery=autho162sear7081DAC4261598F1EFDEC9FCD0Facilities%20Engi/handle/yse/164245 | |
| description abstract | Foreword The present trend in establishing an effective level of external metallic surface corrosion control is the application of a barrier coating or adhesive on the metallic surface prior to the application of a thermal insulating material. Experience has shown that there is generally a limited beneficial effect from the application of cathodic protection (CP) to a bare or ineffectively coated metallic surface under thermal insulation. This NACE technical committee report was prepared as an information guide for external corrosion control of thermally insulated underground metallic surfaces and considerations of the effectiveness of CP. This report is intended for those dealing with thermally insulated structures or pipelines. Although pipelines are the primary focus of this report, the principles discussed would be applicable when a thermal insulating material has been applied on or in the immediate proximity of an underground metallic surface. This report was originally prepared in 1992 by NACE Task Group (TG) T-10A-19, a component of Unit Committee T-10A on Cathodic Protection and was reaffirmed with editorial changes in 2006 by Specific Technology Group (STG) 35 on Pipelines, Tanks, and Well Casings. It is published by NACE under the auspices of STG 35. | |
| language | English | |
| title | NACE 10A392 | num |
| title | Effectiveness of Cathodic Protection on Thermally Insulated Underground Metallic Structures - Item No. 24156 | en |
| type | standard | |
| page | 8 | |
| status | Active | |
| tree | NACE - NACE International:;2006 | |
| contenttype | fulltext |