درباره ما
NACE - NACE International: Recent submissions
Now showing items 101-120 of 344
-
NACE MR0175/ISO 15156 CIR 1 TO PT 2
Abstract: Foreword
The establishment of the NACE/ISO 15156 Maintenance Agency was confirmed by the ISO Technical Management Board in June 2007. A copy of the TMB Vote-Form Number: 34/2007 giving ... -
NACE 01110
Abstract: FOREWORD
This technical committee report reviews the corrosion of reinforcing and prestressing steel in concrete structures caused by stray currents. It provides information on the history of stray-current ... -
NACE TM0190
Abstract: General
This standard test method describes a laboratory procedure for determining the potential and current capacity characteristics of aluminum and zinc alloy anodes used for CP. It provides a means ... -
NACE TM0174
Abstract: This standard provides two test methods for evaluating the performance of protective coatings and linings used as lining materials in immersion service: one-side testing of the panel and immersion testing of the completely ... -
NACE TM0211
Abstract: This standard describes a test method to measure specific physical properties and the relative stability of Cu/CuSO4 PREs when they are subjected to specific environmental stresses. These reference electrodes, ... -
NACE SP0116
Abstract: Introduction
This standard describes the NACE International internal corrosion direct assessment (ICDA) process for multiphase flow pipeline systems. It is intended to serve as a guide for applying the MP-ICDA process ... -
NACE SP0775
Abstract: General
This standard is presented for the use of corrosion coupons in oilfield drilling, production, and transportation operations. Oilfield operations include oil-, water-, and gas-handling systems, ... -
NACE 43113
Abstract: Foreword
This NACE technical committee report reviews the current information available concerning the application of waterborne coatings to railcars. It is not intended as an all-encompassing technical ... -
NACE 1F192
Abstract: Introduction
Definition of CRA — A corrosion-resistant alloy (CRA) is defined as an alloy whose mass-loss corrosion rate in produced fluids is at least an order of magnitude ... -
NACE SP0205
Abstract: General
Spent sulfuric acid, generated by refinery alkylation units (spent acid), may differ from fresh sulfuric acid (fresh acid) in several ways. The most notable differences between alkylation ... -
NACE 6G197
Abstract: Foreword
his state-of-the-art report covers the design, installation, and maintenance of polymeric coating systems that are applied and directly bonded to concrete in secondary containment applications. ... -
NACE RP0375
Abstract: General
This standard covers hot- and cold-applied wax and component wrappers and wax-tape coating systems for the protection of underground metallic pipe, fittings, and valves. It outlines material ... -
NACE RP0281
Abstract: This standard provides guidelines for establishing procedures for coating test panel selection, sutface preparation, coating application, field exposure sites and conditions, and the grading and evaluation of coating ... -
NACE NO. 4
Abstract: This joint standard covers the requirements for brushoff blast cleaning of unpainted or painted steel surfaces by the use of abrasives. These requirements include the end condition of the surface and materials and ... -
NACE TM0384
Abstract: General
This NACE standard provides a nondestructive method for the detection of holidays in a nonconductive coating film that has been applied to the inner wall of oilfield tubular goods. The apparatus ... -
NACE SP0390
Abstract: General
This standard presents corrosion control guidelines that are applicable to existing atmospherically exposed structures made of concrete conventionally reinforced with carbon steel (ASTM(1) ... -
NACE SP0204
Abstract: Introduction
This standard covers the NACE SCCDA process for buried steel pipeline systems. It is intended to serve as a guide for applying the NACE SCCDA process on typical petroleum (natural gas, crude oil, and refined ... -
NACE 11206
Abstract: Foreword
Effective microbiological control is an important aspect of a successful cooling water treatment program. It has often been said that more cooling water treatment programs fail because of poor ... -
NACE SP0408
Abstract: Scope and Limitations
The provisions of this standard should be applied under the direction of a registered Professional Engineer or a person certified by NACE International as a Corrosion Specialist or a CP Specialist. ...