درباره ما
NACE - NACE International: Recent submissions
Now showing items 141-160 of 344
-
NACE TM0113
Abstract: General
This standard describes a test method for evaluating the accuracy of copper/copper sulfate and silver/silver chloride reference electrodes used in the field for measurement of structure-to-electrolyte ... -
NACE RP0104
Abstract: General
A CP coupon may be used to determine the level of CP of a buried or submerged metallic structure. CP coupons are installed in the electrolyte near the structure and are then connected to it ... -
NACE SP0472
Abstract: General
This standard establishes guidelines to prevent most forms of environmental cracking of weldments in carbon steel refinery equipment, including pressure vessels, heat exchangers, storage tanks, ... -
NACE SP0615 WAB
Abstract: General
A WAB-cleaned surface is one prepared by combining water and abrasive in a blast cleaning operation by one of several methods, including
1) injection of water into the abrasive stream either ... -
NACE SP0186
Abstract: This standard presents acknowledged procedures for the control of external corrosion of steel well casings by applying cathodic protection. This standard is intended to be a guide for establishing minimum requirements ... -
NACE NO. 3
Abstract: This joint standard covers the requirements for commercial blast cleaning of unpainted or painted steel surfaces by the use of abrasives. These requirements include the end condition of the surface and materials and ... -
NACE SP0109
Abstract: General
This standard practice presents guidelines for establishing the minimum requirements to ensure the proper selection, application, and performance of bonded tape coatings. These coatings are ... -
NACE 11106
Abstract: Introduction
Monitoring of cooling tower operation falls into two major categories. The first deals with the monitoring and control that is directed at maintaining cooling water chemistry within defined ... -
NACE TM0212
Abstract: General
While the evaluation, monitoring, and mitigation of MIC cannot be prescribed in one particular manner for any given pipeline, this standard describes methodologies by which the appropriate tools ... -
NACE SP0111
Abstract: General
This standard describes a "best practices" approach to satisfying the CTF requirements of the IMO PSPC for seawater ballast tanks and double-side skin spaces. The guidelines provided are for ... -
NACE TM0297
Abstract: This standard sets forth procedures to measure the effect on elastomeric materials subjected to rapid depressurization from elevated pressures and temperatures of 50°C (122°F) or greater in dry CO2 environments ... -
NACE RP0304
Abstract: Thermoplastic liners for pipelines are being specified with increasing frequency to protect new and rehabilitated pipelines in corrosive oilfield services. Thermoplastic liner systems are described in NACE Publication ... -
NACE RP0105
Abstract: General
This standard presents guidelines for establishing minimum requirements for material selection, surface preparation, proper application, inspection, and to ensure long-term coating performance ... -
NACE G193 REV D
Abstract: This terminology and acronyms standard covers and defines commonly used terms and acronyms in the field of corrosion. Related terms may be found in Terminologies D16, D4538, G40, or other ASTM terminology standards.
This ... -
NACE TM0115
Abstract: General
This test method describes an accelerated test procedure for determining comparative resistance to cathodic disbondment of protective coating systems applied to the exterior of steel pipes and ... -
NACE TM0198
Abstract: General
This standard establishes a SSR test method for screening CRAs (i.e., stainless steels and nickel-based alloys) for resistance to SCC at elevated temperatures in sour oilfield production ... -
NACE SP0394
Abstract: General
This standard presents guidelines for establishing the minimum requirements to ensure proper application and performance of plant-applied single-layer fusion-bonded epoxy (FBE) coatings to the ... -
NACE SP0189
Abstract: General
The purpose of this standard is to describe technologies applicable to the online monitoring of cooling water systems. The standard focuses on those technologies that provide data on a short-term ... -
NACE 10A392
Abstract: Foreword
The present trend in establishing an effective level of external metallic surface corrosion control is the application of a barrier coating or adhesive on the metallic surface prior to the ... -
NACE TM0112
Abstract: General
This standard test method is designed to test the effect of long-term exposure of treated water on an approved coating system and other materials such as ballast piping and anodes located within ...