درباره ما
NACE - NACE International: Recent submissions
Now showing items 161-180 of 344
-
NACE TM0499
Abstract: General
This standard describes procedures for performing immersion corrosion tests for evaluation of ceramic materials. It is applicable to laboratory, field, or in-plant use for the evaluation of a ... -
NACE TM0177
Abstract: General
This standard covers the testing of metals subjected to tensile stresses for resistance to cracking failure in low-pH aqueous environments containing H2S. Carbon and low-alloy steels ... -
NACE MR0176
Abstract: General
An adequate chemical treatment program using a selection of proper corrosion inhibitors and application techniques is necessary for optimum performance of sucker-rod pumping equipment in a ... -
NACE SP0290
Abstract: The provisions of this standard should be applied under the direction of a registered Professional Engineer or a person certified by NACE International as a Corrosion Specialist or certified as a Cathodic Protection ... -
NACE SP0214
Abstract: Introduction
The water-usage systems addressed in this standard are as follows. (Note: this list covers all piping systems in residential and office buildings; it is not applicable to industrial facilities.)
GROUP ... -
NACE RP0391
Abstract: This standard provides information about the design and selection of materials used in the handling and storage of commercial concentrated sulfuric acid at ambient temperatures. The term ambient is intended to include ... -
NACE SP0177
Abstract: General
This standard presents acknowledged practices for the mitigation of AC and lightning effects on metallic structures and corrosion control systems.
This standard covers some of the basic ... -
NACE MR0175/ISO 15156
Abstract: This part of ANSI/NACE MR0175/ISO 15156 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production ... -
NACE SP0415
Abstract: This standard provides requirements to (1) help utilities identify structures that may be at a high risk for below-grade corrosion; (2) excavate and inspect the selected structures; (3) categorize the condition of structures ... -
NACE 35103
Abstract: Introduction
SCC is one form of environmentally assisted cracking (EAC). EAC is a generic term that describes all types of cracking in materials in which the environment and stress act together to ... -
NACE SP0408
Abstract: Scope and Limitations
The provisions of this standard should be applied under the direction of a registered Professional Engineer or a person certified by NACE as a Corrosion Specialist or a CP Specialist. ... -
NACE SP0296
Abstract: General
This standard is intended to be a primary source of information on cracking in wet H2S petroleum refinery environments and provides guidelines on the detection, repair, and mitigation ... -
NACE RP0495
Abstract: The quality of a coating application depends primarily upon the capabilities of the people who are performing the actual work. This standard has been prepared to establish guidelines for the qualification of abrasive ... -
NACE SP0297
Abstract: Purpose of Coating Electrical Substation Apparatus
Electrical substation apparatus is coated for one or more of the following reasons:
To protect the metal portions of the apparatus from corrosion. ... -
NACE SP0715 WAB
Abstract: General
A WAB-cleaned surface is one prepared by combining water and abrasive in a blast cleaning operation by one of several methods, including 1) injection of water into the abrasive stream either ... -
NACE TM0296
Abstract: General
This standard sets forth procedures to measure the ability of elastomeric materials to withstand static exposure to sour liquid environments (e.g., hydrocarbon, water, or mixtures of each with ... -
NACE SP0298
Abstract: This standard provides requirements for sheet rubber lining of various equipment for protection against corrosion and/or abrasion. This standard can be used in design, installation, inspection, testing, and storage of ... -
NACE SP0592
Abstract: General
This standard describes a procedure for the application of a coating system to the interior sutfaces of new and used railroad steel tank cars used primarily in the transportation of concentrated ... -
NACE SP0403
Abstract: General
This standard practice establishes guidelines to avoid caustic SCC of equipment and piping. It addresses applications that use "fresh" caustic.
In some services that involve ... -
NACE SP0102
Abstract: General
This standard is applicable to carbon steel pipeline systems used to transport natural gas, hazardous liquids including anhydrous ammonia, carbon dioxide, water including brine, liquefied ...