درباره ما
NACE - NACE International: Recent submissions
Now showing items 181-200 of 344
-
NACE SP0292
Abstract: General
This standard provides technical and quality assurance guidelines for handling and installing nickel alloy, stainless steel, and titanium linings in air pollution control equipment such ... -
NACE NO. 10
Abstract: This standard recommended practice specifies the procedures to design, apply, and inspect fiberglass-reinforced plastic (FRP) linings that are applied internally to the bottom of carbon steel aboveground storage tanks ... -
NACE MR0175/ISO 15156 CIR 2 TO PT 3
Abstract: General
CRAs and other alloys shall be selected for their resistance to SSC, SCC and/or GHSC as required by the intended service.
Compliance of a CRA or other alloy with this part of ANSI/NACE ... -
NACE TM0183
Abstract: GeneralÂ
The test method set forth in this standard can be used to evaluate and compare the corrosion protection that various internal plastic coatings afford oilfield tubular goods. Using ... -
NACE NO. 2
Abstract: This joint standard covers the requirements for nearwhite metal blast cleaning of uncoated or coated steel surfaces by the use of abrasives. These requirements include the end condition of the surface and materials and ... -
NACE SP0114
Abstract: General
Injection points and process mix points for several typical refinery process streams are addressed in detail. The discussion of process mix points is limited to primary process streams, and ... -
NACE SP0398
Abstract: General
This standard provides guidelines specific to the railcar industry for the in-house training and employer administered qualification of level of coating-inspection qualification. An employee ... -
NACE WJ-3
Abstract: General
This standard defines the Thorough Cleaning (WJ-3) degree of surface cleanliness of uncoated or coated metallic substrates by use of waterjet cleaning. The defined degree of cleanliness shall ... -
NACE 01105
Abstract: Introduction
Over the past several decades the corrosion of steel reinforcement embedded in concrete structures has received considerable worldwide attention. In theory, concrete and reinforcing steel ... -
NACE 01210
Abstract: Introduction
Two practical methods of treatment are available to prevent steel frame corrosion:
(a) Treating the steel and changing the environment (e.g., removing the facade, applying protective ... -
NACE 43108
Abstract: Foreword
This report identifies guidelines for regulatory qualification of railcar linings in corrosive service. Its purpose is two-fold: 1) to report primary lining inspection intervals used by ... -
NACE SP0191
Abstract: General
This standard presents guidelines for the proper application of plastic coatings to the internal surfaces of oilfield tubular goods and accessories.
The function of the internal plastic ... -
NACE TM0104
Abstract: This NACE standard test method covers both new construction and maintenance ballast water tank coating systems for tension leg platforms (TLPs), semi-submersible platforms, and floating production and storage offloading ... -
NACE 35110
Abstract: Introduction
The phenomenon of AC corrosion has been considered by many authors since the early 1900s. However, the mechanisms of AC corrosion are still not completely understood. The body of recent ... -
NACE SP0274
Abstract: General
Electrical inspection (holiday detection) is a test of the continuity of a protective coating. This type of inspection does not provide information concerning coating resistance, bond, physical ... -
NACE RP0602
Abstract: This standard presents guidelines for establishing minimum requirements to ensure proper application and performance of a field-applied coal tar enamel (CTE) system to the external surfaces of pipe. Included are methods ... -
NACE SP0206
Abstract: Introduction
This standard covers the NACE internal corrosion direct assessment (ICDA) process for normally dry natural gas pipeline systems. This standard is interned to serve as a guide for applying the NACE DG-ICDA ... -
NACE SP0178
Abstract: This standard presents standard practices for the design, fabrication, and surface finish of tanks and vessels to be lined for immersion service. Tanks and vessels may be lined for corrosion control or to prevent product ... -
NACE 11100
Abstract: Introduction
In the recent past the costs of damage due to corrosion of reinforced concrete have risen dramatically. Concrete structures such as bridges, parking garages, buildings, and marine docks ... -
NACE SP0892
Abstract: The scope of this standard is to set forth guidelines for the selection and installation of liquid organic coatings to be used over properly prepared concrete surfaces exposed to immersion conditions or chemical splash ...