MIL-C-10799H

Abstract

This document covers the requirements for waterproof, fire and mildew resistant, vinyl-coated cotton cloth (see <a>6.1</a>). <br>Vinyl-coated cotton cloth shall be of the following types and classes (see <a>6.2</a>). </span><pre> Type I Coated cloth Class 1 - Plain weave 7.0 to 8.5 ounces (both sides coated). Class 3 Twill weave 14.0 to 16.0 ounces (one side coated). Type II Coated duck (both sides coated) Class 1 - Army duck, cotton plied yarns, 15.5 to 18.5 ounces. Class 3 - Army duck, cotton plied yarns, 12.0 to 15.0 ounces. Class 4 - Army duck, cotton plied yarns, 18.0 to 21.0 ounces. Class 5 - Army duck, cotton plied yarns, 22.0 to 25.0 ounces.</pre> <br> <strong>Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: US Army Natick Research and Development Laboratories, Natick, MA 01760 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.</strong> <br><b><u>Intended Use:</u></b> (See <a>1.2</a>). Type I cloths of this document are intended for use in the manufacture of the following: <pre> Class 1 - Airplane wing covers, engine covers and shelters. Class 3 - Covers for molded plastic parts such as aircraft turrets, canopies and equipage items.</pre> Type II cloths of this document are intended for use in the manufacture of the following: <pre> Class 1 - Insulated frame type tents. This cloth is not suitable for use in the manufacture of luggage. Classes 3, 4 and 5 - Recognition panels; covers where water, oil and gasoline-proof material is required; carrying cases for life rafts; life raft equipment and similar items.</pre> The cloths are not intended for use in wearing apparel or other items which may come into frequent or prolonged intimate contact with the skin. <br>