KSC - NASA - KSC - Kennedy Space Center: Recent submissions

Now showing items 81-94 of 94

    • KSC-GP-986 REV A 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1993
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This document establishes the general design criteria for reusable space vehicle umbilical systems. The criteria specified herein is limited to the service arms or equivalent mechanisms, umbilical carriers and plates, ...

    • KSC-SPEC-Z-0013 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1969
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This specification covers the requirements for nondestructive testing, using penetrant, magnetic particle and ultrasonic inspection methods. Inspection testing as defined herin shall be used when required by engineering drawings

    • KSC-SPEC-P-0021 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2001
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This specification establishes the requirements for 1,1,1,2,3,4,4,5,5,5-decafluoropentane (or 2,3-dihydrodecafluoropentane). Intended Use: The solvent described in this specification is intended for use as ...

    • KSC-SPEC-E-0031 REV B 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2008
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This specification establishes the general characteristic, construction, material, marking inspection, testing, and packaging requirements for flexible, multiconductor neoprene-jacketed electrical cables. These shall be ...

    • KSC-SPEC-Z-0006 REV A 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1995
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-SPEC-Z-0005 REV A 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1995
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This specification covers brazing, inspection of brazed joints, and qualifying of brazers, brazing operators, and brazing procedures.
      Criticality. - Brazing performed to this specification shall be classified ...

    • KSC-STD-E-0004 REV B 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2008
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This standard establishes the requirements applicable to the electrical design of pneumatic and hydraulic mechanical components at the John F. Kennedy Space Center (KSC), NASA. This standard applies to those components ...

    • KSC-KTI-5210 REV C 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2012
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This document is intended as a resource for materials selection for design of oxygen systems for KSC ground support equipment (GSE) and ground support systems (GSS). Flammability and combustion data extracted from NASA, ...

    • KSC-SPEC-P-0019 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1999
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-SPEC-G-0002 REV B 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1986
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-STD-Z-0013 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1988
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-STD-164 REV B 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1992
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This standard establishes test methods for determining the capability of ground support equipment (GSE) and other facility hardware to function when exposed to the natural and induced environments peculiar to the prelaunch ...

    • KSC-SPEC-P-0018 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1995
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-SPEC-P-0027 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2010
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This specification defines the requirements for pressure tubing suitable for use with standard, 37-degree, flared tube fittings and butt welding tube fittings in fluid systems at the John F. Kennedy Space Center (KSC), ...