درباره ما
KSC - NASA - KSC - Kennedy Space Center: Recent submissions
Now showing items 61-80 of 94
-
KSC-GP-435 VOL I REV F CHANGE 2
Abstract: This manual establishes the requirements, procedures, and practices for the preparation, release, revision, modification, maintenance, and control of engineering drawings prepared for or by the John F. Kennedy Space Center ... -
KSC-STD-F-0005
Abstract: It is NASA policy to utilize consistency during the selection and standardization of materials for construction at KSC. This document provides clarifications of the requirements and recommended material choices for flooring ... -
KSC-STD-Z-0008 REV C
Abstract: This standard, to be used in conjunction with SW-E-0002 and KSC-DE-512-SM, establishes basic mechanical design requirements for ground life support systems and equipment for use at KSC and other installations under KSC ... -
KSC-MTB-175-88
Abstract: This procedure provides a means to determine the effects of minor amounts of hypergolic fluids, such as a splash, on materials such as plastics, foams, adhesives, coatings, composites, elastomers, fabrics, coated fabrics, ... -
KSC-STD-P-0006
Abstract: This standard covers the usage and installation of quick release pins and pin tethers on ground support equipment (GSE) and facilities at the John F. Kennedy Space Center (KSC) or area under KSC responsibility. This standard ... -
KSC-STD-E-0014 REV B
Abstract: This standard provides information applicable to the selection and applications of the standard 60-hertz alternating current (ac) power wires and cables that shall be used at the John F. Kennedy Space Center (KSC), NASA. ... -
KSC-SPEC-P-0024
Abstract: This specification establishes the requirements for hydrochlorofluorocarbon- (HCFC)-124, 2-chloro-1,1,1,2-tetrafluoroethane. Intended Use: The material described in this specification is intended for use as ... -
KSC-STD-Z-0006 REV B
Abstract: This standard establishes the minimum design requirements for hypergolic propellant ground support equipment (GSE) required for use at the John F. Kennedy Space Center (KSC). This standard shall be used in conjunction with ... -
KSC-DD-818-TR
Abstract: The data presented include launch data from STS-1 through STS-11. All Space Shuttles were launched at Pad A from Mobile Launcher Platform (MLP) - 1, except STS-6, -8, and -9, which were launched from MLP-2.
PURPOSE ... -
KSC-SPEC-E-0017 REV C
Abstract: This specification establishes the requirements for installation and testing of 60-hertz alternating current (ac) power cables by support contractors at the John F. Kennedy Space Center (KSC). Open-wire and building-wire ... -
KSC-STD-E-0010 REV A
Abstract: This standard establishes the requirements for soldering of electrical connections on ground support equipment (GSE) that does not directly interface with flight hardware, or where the requirements of NHB 5300.4 (3A-2) are ... -
KSC-STD-E-0001 REV C
Abstract: This standard establishes the minimum design requirements for electrical control and monitoring systems, ground support equipment (GSE), and panels that support processing systems both automated (e.g., Launch Control System ... -
KSC-MMA-1985-79 REV 6
Abstract: This method describes the triboelectric test device used at the Kennedy Space Center (KSC) for electrostatic evaluation of non-conducting materials, including sample preparation and preconditioning, test procedure, and ... -
KSC-STD-E-0022
Abstract: This standard provides design and testing requirements for bonding, grounding, shielding, electromagnetic interference (EMI), lightning protection, electrostatic discharge (ESD) protection, transient protection, and surge ... -
KSC-SPEC-E-0019 REV B
Abstract: This specification provides data for the procurement of multiconductor, 600-volt, alternating current (ac), 60-hertz power cable. The cables included in this specification employ soft annealed copper conductors, either ... -
KSC-S-126 REV B
Abstract: Introduction
This specification defines four grades of seals for noncryogenic use in the design of electrical components and their assemblies, containers, and equipment used in ground support equipment ... -
KSC-STD-SF-0004 REV B
Abstract: This standard establishes a common color code for visual warnings to accompany the written identification of materials covered in piping systems. The use of this standard will promote greater safety and will lessen the ... -
KSC-SPEC-E-0018 REV B
Abstract: This specification provides data for the procurement of single conductor, 600-volt, alternating current (ac), 60-hertz power wire. The wires included in this specification employ soft annealed copper conductors, either ...