درباره ما
ASME - ASME International: Recent submissions
Now showing items 281-300 of 1083
-
ASME B18.16M
Abstract: This Standard covers the complete general, dimensional, mechanical, and performance data for metric prevailing-torque hex nuts and hex flange nuts of property classes 5, 9, and 10 as defined in ASTM A563M.
The inclusion ... -
ASME B1.12
Abstract: This Standard provides dimensional tables for external and internal plastic flow interference-fit (Class 5) threads of modified National thread form in the coarse thread series (NC) in sizes 0.250 in. through 1.500 in. ... -
ASME B1.16M
Abstract: INTRODUCTION
This Standard provides essential specifications and dimensions for the gages used on M series metric screw threads, and covers the specifications and dimensions for the thread gages and ... -
ASME B31T
Abstract: INTRODUCTION
This Standard provides requirements for evaluating the suitability of materials used in piping systems for piping that may be subject to brittle failure due to lowtemperature service ... -
ASME PTC 46
Abstract: OBJECT AND SCOPE
This Code applies to any plant size. It can be used to measure the performance of a plant in its normal operating condition, with all equipment in a clean and fully-functional condition. This Code ... -
ASME B31E
Abstract: Rules for this Code Section have been developed considering the needs for applications which include piping typically found in electric power generating stations, in industrial and institutional plants, geothermal heating ... -
ASME B18.6.9
Abstract: This Standard covers complete general and dimensional data for nine various types and styles of wing nuts. Thumb screws and wing screws, recognized as American National Standard, are included in ASME B18.6.8.
The ... -
ASME B18.8.200M
Abstract: Scope:
The need for a standard covering machine pins was recognized by industry as far back as March 1926, when the Sectional Committee on the Standardization of Machine Pins was ... -
ASME PTC 32.1
Abstract: OBJECT AND SCOPE
The purpose of this Code is to establish procedures for conducting tests to determine the thermal performance of a nuclear steam supply system as a unit. These tests include capacity, reactor ... -
ASME B31.4
Abstract: This Code prescribes requirements for the design, materials, construction, assembly, inspection, testing, operation, and maintenance of liquid pipeline systems between production fields or facilities, tank farms, above- ... -
ASME B30.27
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-handling related equipment. For the ... -
ASME STP-PT-005
Abstract: This report provides recommendations to the ASME Hydrogen Project Team for design factors for composite hydrogen tanks. The scope of this study included stationary (e.g., storage) and transport tanks; it does not include ... -
ASME RT-2
Abstract: Subjects Covered by This Standard
This Standard applies to carbodies of newly constructed heavy rail transit vehicles for transit passenger service in North America. It defines requirements for the ... -
ASME PTC 31
Abstract: Only the relevant portion of this Code need apply to any individual case or test under consideration. In some cases the procedure is simple; however, for complex systems or complex modes of system operation, the procedures ... -
ASME RTP-1
Abstract: INTRODUCTION
GENERAL
The use of reinforced thermoset plastic (RTP) vessels, operating at pressures not exceeding 15 psig external and/or 15 psig internal above any hydrostatic head, ... -
ASME B30.9 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Committee, Safety Standard for Cableways, ... -
ASME B89.1.17
Abstract: This Standard is intended to establish uniform practices for the measurement of thread measuring wires. The standard includes methods for the direct measurement of both master and working wires, and methods for the comparison ... -
ASME B107.17
Abstract: This Standard establishes final inspection gage sizes and test mandrel sizes for wrench openings and spark plug wrench openings for inch and metric sizes. This Standard does not cover every available size, but only those ... -
ASME B30.20 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Committee, Safety Standards for Cableways, ...