Now showing items 281-296 of 296

    • AWWA C502 

      Type: standard
      Source: AWWA - American Water Works Association:;2005
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes post-type, dry-barrel fire hydrants with compression shutoff (opening against or with the pressure) or gate shutoff for use in water supply service in all climates, including those where freezing ...
    • AWWA D100 

      Type: standard
      Source: AWWA - American Water Works Association:;2011
      Organization : AWWA - American Water Works Association
      Abstract: The purpose of this standard is to provide minimum requirements for the design, construction, inspection, and testing of new welded carbon steel tanks for the storage of water at atmospheric pressure.
      Tank roofs. ...
    • AWWA B300 

      Type: standard
      Source: AWWA - American Water Works Association:;2010
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes chlorinated lime, calcium hypochlorite, and sodium hypochlorite for use in water, wastewater, and reclaimed water treatment.
      Purpose
      The purpose of this standard is to provide ...
    • AWWA C504 

      Type: standard
      Source: AWWA - American Water Works Association:;2010
      Organization : AWWA - American Water Works Association
      Abstract: This standard establishes minimum requirements for rubber-seated butterfly valves, 3 in. (75 mm) through 72 in. (1,800 mm) in diameter, with various body and end types, for fresh water having a pH range from 6–12 and ...
    • AWWA C503 

      Type: standard
      Source: AWWA - American Water Works Association:;2005
      Organization : AWWA - American Water Works Association
      Abstract: This standard pertains to the various types and classes of wet-barrel fire hydrants for use in water-supply service in areas where the climate is mild and freezing temperatures do not occur. A wet-barrel hydrant has one ...
    • AWWA C151/A21.51 

      Type: standard
      Source: AWWA - American Water Works Association:;2009
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes 3-in. through 64-in. (76-mm* through 1,600-mm) ductile-iron pipe, centrifugally cast, for water, wastewater, and reclaimed water systems with push-on joints or mechanical joints. Requirements for ...
    • AWWA C701 

      Type: standard
      Source: AWWA - American Water Works Association:;2012
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes the various classes of cold-water turbine meters in sizes ¾ in. (20 in. (500 mm) for water supply customer service, mainline metering, and custody transfer of water among purveyors, and the ...
    • AWWA C550 

      Type: standard
      Source: AWWA - American Water Works Association:;2013
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes protective interior coatings for valves used for water supply, wastewater collection and treatment, and reclaimed water service having a pH range from 4 to 9; and for hydrants used for water supply ...
    • AWWA C651 

      Type: standard
      Source: AWWA - American Water Works Association:;2005
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes essential procedures for the disinfection of new and repaired potable water mains. New water mains shall be disinfected before they are placed in service. Water mains taken out of service for ...
    • AWWA D102 

      Type: standard
      Source: AWWA - American Water Works Association:;2011
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes coating systems for coating and recoating the inside and outside surfaces of steel tanks used for potable water storage in water supply service. Coating systems for new bolted steel tanks are not ...
    • AWWA C652 

      Type: standard
      Source: AWWA - American Water Works Association:;2011
      Organization : AWWA - American Water Works Association
      Abstract: This standard for disinfection of water-storage facilities describes materials, facility preparation, application of disinfectant to interior surfaces of facilities, and sampling and testing for the presence of coliform ...
    • AWWA C105/A21.5 

      Type: standard
      Source: AWWA - American Water Works Association:;2010
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes materials and installation procedures for polyethylene encasement to be applied to underground installations of ductile-iron pipe. This standard also may be used for polyethylene encasement of ...
    • AWWA C104/A21.4 

      Type: standard
      Source: AWWA - American Water Works Association:;2008
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes shop-applied, cement–mortar linings specified in the ANSI*/AWWA C100/A21 series of standards for ductile-iron pipe and ductile-iron and gray-iron fittings for water, wastewater, and reclaimed ...
    • AWWA C210 

      Type: standard
      Source: AWWA - American Water Works Association:;2007
      Organization : AWWA - American Water Works Association
      Abstract: This standard sets minimum requirements for shop‑ and field‑applied, liquid‑epoxy interior linings and exterior coatings used in the water‑supply industry for steel water pipelines installed underground ...
    • AWWA C606 

      Type: standard
      Source: AWWA - American Water Works Association:;2011
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes grooved and shouldered joints for ductile-iron pipe, metallic pressure pipe of iron pipe size, and fittings, and other components for water service. The standard describes 4-in. through 24-in. (102-mm ...
    • AWWA C205 

      Type: standard
      Source: AWWA - American Water Works Association:;2012
      Organization : AWWA - American Water Works Association
      Abstract: This standard describes the material, application, and curing of shop-applied cement–mortar protective linings and coatings for steel water pipe and fittings and field jointing of cement–mortar-lined-and-coated ...