درباره ما
AWWA - American Water Works Association: Recent submissions
Now showing items 261-280 of 296
-
Aluminum Dome Roofs for Water Storage Facilities
Abstract: This standard establishes minimum criteria for the design, fabrication, and erection of structurally supported aluminum dome roofs. Aluminum dome roofs can be used on any size tank erected in accordance with AWWA ... -
Water Wells
Abstract: This standard describes the minimum requirements for vertical water supply wells and is designed primarily for municipal and industrial applications. Purpose The purpose of this standard is to provide the minimum ... -
AWWA B300 ADD A
Abstract: This standard describes chlorinated lime, calcium hypochlorite, and sodium hypochlorite for use in water, wastewater, and reclaimed water treatment.
Purpose
The purpose of this standard is to provide ... -
AWWA C700
Abstract: This standard describes the various types and classes of cold-water displacement meters with bronze main cases, in sizes 1/2 in. (13 mm) through 2 in. (50 mm), and the materials and workmanship employed ... -
AWWA C203
Abstract: This standard provides the minimum requirements for coal-tar protective exterior coatings and interior linings used in the water supply industry for buried steel water pipelines.
AWWA steel pipe coating standards are ... -
AWWA C300
Abstract: This standard describes the manufacture of reinforced concrete cylinder pipe that is not prestressed or pretensioned, in sizes 30 in. to 144 in. (760 mm to 3,660 mm), inclusive. Larger sizes have been manufactured based ... -
AWWA C111/A21.11
Abstract: This standard describes rubber-gasket joints of the following types for ductile- iron pressure pipe and ductile-iron and gray-iron fittings, valves, hydrants, and other appurtenances for potable water, wastewater, and ... -
AWWA M9
Abstract: Purpose and Scope
The use of concrete pressure pipe for conveying water and other liquids under pressure has dramatically increased in recent years. Its rugged construction and the natural corrosion ... -
AWWA C303
Abstract: This standard describes the manufacture of concrete pressure pipe, reinforced with a steel cylinder that is helically wrapped with mild steel bar reinforcement, in sizes ranging from 10 in. through 72 in. (250 mm through ... -
AWWA C209
Abstract: This standard describes protective exterior coatings that consist of coldapplied liquid adhesives and prefabricated tapes and their applications to special sections, connections, and fittings to be used for underground and ... -
AWWA C301
Abstract: This standard describes the manufacture of circumferentially prestressed concrete pressure pipe with a steel cylinder and wire reinforcement in sizes 16 in. (410 mm) through 144 in. (3,660 mm). Larger sizes have been ... -
AWWA C704
Abstract: This standard describes the various types and classes of propeller meters in sizes 2 in. (50 mm) through 72 in. (1,800 mm) for waterworks applications. These meters register by recording the revolutions of a propeller set ... -
AWWA C115/A21.15
Abstract: This standard describes 3-in. through 64-in. (80-mm through 1,600-mm) flanged ductile-iron pipe with ductile-iron or gray-iron threaded flanges for potable water, wastewater, and reclaimed water service. Flanged pipe and ... -
AWWA C702
Abstract: This standard describes the various types and classes of cold-water compoundType meters in sizes 2 in. (50 mm) through 8 in. (200 mm), and the materials and workmanship used in their fabrication. Compound meters shall ... -
AWWA C703
Abstract: This standard describes the various types and classes of cold-water fireserviceType meters in sizes 3 in. (80 mm)* through 10 in. (250 mm) and the materials and workmanship used in their fabrication. A fire-service meter ... -
AWWA C213
Abstract: This standard describes the material and application requirements for fusion-bonded epoxy coatings for the interior and exterior of steel water pipe, special sections, welded joints, connections, and fittings for steel ... -
AWWA B502
Abstract: This standard describes sodium polyphosphate, glassy, for use in the treatment of potable water, wastewater, and reclaimed water. This material is also known as sodium hexametaphosphate, sodium tetrapolyphosphate, and ... -
AWWA B301
Abstract: This standard describes liquid chlorine for use in water, wastewater, and reclaimed water treatment.
Purpose
The purpose of this standard is to provide the minimum requirements for liquid chlorine, ... -
AWWA C302
Abstract: This standard describes the manufacture of circumferentially reinforced concrete pressure pipe, without a steel cylinder and not prestressed, in sizes from 12 to 144 in. (300 to 3,660 mm) inclusive and for working pressures ...