درباره ما
AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF): Recent submissions
Now showing items 201-220 of 461
-
DI-TMSS-81641 VALID NOTICE 1
Abstract: Intended Use: This data package allows the calibration technical order writers to provide input to the government allowance standard monitor. The data provides recommended test equipment listing (TEL) for ... -
A-A-50747
Abstract: This commercial item description covers one type and size of ammunition pouch. The pouch is designed to accommodate one 15 round ammunition magazine for the M9, 9MM, PDW. -
A-A-58008A VALID NOTICE 1
Abstract: This Commercial Item Description (CID) describes a Test Set, Telecommunications System (TTS). This CID is meant as a minimum requirement for the TTS in which only those manufacturers which meet or exceed the following ... -
MIL-M-4785
Abstract: This specification covers both medium and heavy duty, high-speed, vertical milling machines, electric-motor driven, floor mounted, with equipment and accessories as described herein at the option of the procuring agency. ... -
A-A-59259B
Abstract: This commercial item description covers the general requirements for the R-12 Hydrant Servicing Vehicle (herein referred to as HSV) used for fuel servicing both military and commercial aircraft at Government installations ... -
A-A-50721A
Abstract: This Commercial Item Description (CID) covers the characteristics for a rugged, environmentally protected, commercial type weighing scale with a nominal inaccuracy of +/− 0.1% of applied load. The scales covered by ...Subject(s) : Low profile cargo , scale , -
A-A-59575
Abstract: This commercial item description covers a 120 VAC powered fluorescent light fixture mounted on wheels to provide illumination on the bottom side of equipment while located inside a paint spray booth. Being intended for use ... -
A-A-59722
Abstract: This commercial item description covers a mobile power unit used to supply electric power, ventilation, compressed air, and water removal for telecommunication and utility installation and maintenance crews in cable vaults ... -
A-A-58003F
Abstract: This commercial item description (CID) covers a structural pumper truck. It has a 4x2 or 4x4 chassis; a diesel engine and automatic transmission; a cab to accommodate at least five seated persons with at least four doors; ... -
TT-B-1325D VALID NOTICE 1
Abstract: This specification covers three types of retro-reflective beads used to reflectorize traffic and airfield marking paints. Intended Use: Type I, Gradation A, coarse - low-index recycled glass beads for drop-on ... -
A-A-59831
Abstract: Description.
This Commercial Item Description (CID) covers the general requirements for an electric, front wheel drive, rear-wheel steer, sit down operator, solid tired, 4000 pound at 24 inch load center capacity, ...Subject(s) : Front wheel drive , Hydraulic , Rear-wheel steer , -
A-A-59790 VALID NOTICE 1
Abstract: This commercial item description (CID) covers a stationary, torque motor driven truck and vehicle wheel balancer for tube-type or tubeless tires used on trucks and vehicles. The operator driven vehicle should be capable ... -
A-A-59321A VALID NOTICE 1
Abstract: This Commercial Item Description (CID) describes a portable flight-line tactical air navigation (TACAN) test set (referred to herein as the test set). This CID is meant as a minimum requirement for the test set in which ... -
MIL-STD-859A
Abstract: This standard establishes the static pressure pin inches of mercury for values of pressure altitude H in geopotential feet to be used in the design and calibration of all aircraft equipment whose operation is a function ... -
A-A-58048C
Abstract: This Commercial Item Description (CID) is for a tire safety cage used for inflating large truck and aircraft tires. The cage is limited in use to tires with a pressure rating of 232 psi. The cage features is in compliance ... -
A-A-59723 VALID NOTICE 1
Abstract: This commercial item description covers an electrical operated, air and cold solvent anti-friction bearing cleaner, sometimes called a bearing cleaning bench.