Now showing items 221-240 of 461

    • A-A-59101B VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID), describes Wattmeter (Audio Power Meter). This CID is meant as a minimum requirement for the audio power meter in which only those manufacturers that meet or surpass the following ...
    • A-A-58040 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial item description covers gasoline-engine driven and pneumatic-powered, vibrating screeds.
      Type I - Engine driven
      Type II - Air driven, convertible
    • A-A-59928A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2013
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: The test set covered by this specification is intended to be a portable fuel flow meter unit and eight test cables. The Fuel Flow Meter Test Set (here on referred to as test set or flow meter) is a support equipment test ...
    • A-A-50747 (1) 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1988
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    • A-A-58043 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1995
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) describes a diesel engine driven commercial 34 cubic yard recycling truck utilized for the curbside collection of recyclables. The truck shall be equipped with curbside loading trough, ...
    • A-A-59824 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2009
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial item description (CID) describes a Fuel Spray Pattern Test Set which hereafter will be referred to as the test set. The test set is capable of measuring the spray pattern angle and check for external leakage ...
      Subject(s) : Measure of Angle ,
    • MIL-PRF-9954D 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2009
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers glass beads to be used with pressure/suction type blasting equipment.Intended Use: The glass beads covered by this specification are intended for use in suction/pressure blasting ...
      Subject(s) : Finishing ,
    • MIL-B-4548A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1956
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers floor-mounted, hydraulic-type, aircraft pipe and conduit bending machines. Intended Use: The bending machines covered by this specification are intended for use in cold-bending ...
    • MIL-I-25470 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1957
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers one type of azimuth and range indicator, designated Indicator, Azimuth and Range IP-284A/APS. Intended Use: The Indicator, Azimuth and Range, IP-284A/APS is intended for use as part ...
    • A-A-59381 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2003
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description describes a soil resistance meter. The soil resistance meter is used to measure earth resistance and ground sensitivity. This CID is meant as a minimum requirement for the soil resistance ...
    • MIL-PRF-32278B 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2008
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification describes a tactical automated tank gauging (TATG) system that is capable of accurately measuring the quantity of liquid petroleum in collapsible tactical fuel storage tanks, which are used throughout ...
      Subject(s) : Measurement receiver ,
    • A-A-59790 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2006
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial item description (CID) covers a stationary, torque motor driven truck and vehicle wheel balancer for tube-type or tubeless tires used on trucks and vehicles. The operator driven vehicle should be capable ...
      Subject(s) : Corrosion resistant , National stock number , Wheel balancer ,
    • A-A-59271A 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2010
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial item description (CID) covers the requirements for a portable, self contained aircraft composite repair set with capability to generate, control, and monitor vacuum pressures and cure temperatures. This ...
      Subject(s) : Cure temperatures , Portable , Self contained , Vacuum pressures ,
    • A-A-59889 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This commercial item description covers the general requirements for passenger boarding staircase trucks servicing military and commercial aircraft on Government installations.Intended Use: The Aircraft ...
      Subject(s) : Type II , Work Vehicle ,
    • MIL-PRF-26873D VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This specification covers a fuel transfer trailer surge suppressor. Intended Use: The surge suppressor covered by this specification is intended for use as an integral part of gasoline, jet fuel, dispensing ...
      Subject(s) : Bellows , Housing , Hydrostatic , Inlet port , Pipelines , Piston Assembly , Surge Pressure ,
    • A-A-58045B VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID) covers the requirements for one type of MB-2 aircraft towing tractor, hereafter referred to as tow tractor. The tow tractor is capable of towing military aircraft up to 500,000 pounds ...
    • A-A-58049B VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2013
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
    • MIL-STD-859A NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;1979
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This standard establishes the static pressure p in inches of mercury for values of pressure altitude H in geopotential feet to be used in the design and calibration of all aircraft equipment whose operation is a function ...
    • MIL-HDBK-349 VALID NOTICE 1 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2012
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This handbook focuses primarily on the requirements for fabrication and inspection for acceptance of adhesive bonded, aluminum faced, non perforated aluminum honeycomb core sandwich assemblies intended for use as aircraft ...
    • A-A-59804 

      Type: standard
      Source: AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF):;2008
      Organization : AIR FORCE - 69 - Air Force Packaging Technology and Engineering Facility (AFPTEF)
      Abstract: This Commercial Item Description (CID), describes a synthesized sweep/signal generator capable of generating signals over the frequency range of 10 MHz to 26.5 GHz with analog sweep capabilities with high stability time-base. ...