درباره ما
Standard Specification for Glass Used as a Horizontal Surface in Desks and Tables
ASTM F2813-18
Organization:
ASTM - ASTM International
Year: 2023
Abstract: This specification covers performance requirements to ensure the use of safety glass when employed as an unenclosed horizontal surface under 44 in. (1118 mm) in height in a desk or table. It is intended to minimize the likelihood of serious cutting and piercing injuries that may occur due to the breakage of glass used as a horizontal surface in desks and dining, coffee, end, display, mobile, outdoor, and other types of tables. Glass shall be laminated safety glass or tempered safety glass that complies with the following: performance criteria of ANSI Z97.1-2009 and the use of monolithic annealed, monolithic chemically strengthened or monolithic wired glass shall not be permitted with the exception of glass fully-supported by and bonded to a non-glass material and glass surfaces incorporating or constituting display screens.
Collections
:
-
Statistics
Standard Specification for Glass Used as a Horizontal Surface in Desks and Tables
Show full item record
| contributor author | ASTM - ASTM International | |
| date accessioned | 2024-12-17T22:31:07Z | |
| date available | 2024-12-17T22:31:07Z | |
| date copyright | 2023 | |
| date issued | 2023 | |
| identifier other | f2813-18r23.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessionid=190419C4AB017808E65B78A0B48BF7AE/handle/yse/337637 | |
| description abstract | This specification covers performance requirements to ensure the use of safety glass when employed as an unenclosed horizontal surface under 44 in. (1118 mm) in height in a desk or table. It is intended to minimize the likelihood of serious cutting and piercing injuries that may occur due to the breakage of glass used as a horizontal surface in desks and dining, coffee, end, display, mobile, outdoor, and other types of tables. Glass shall be laminated safety glass or tempered safety glass that complies with the following: performance criteria of ANSI Z97.1-2009 and the use of monolithic annealed, monolithic chemically strengthened or monolithic wired glass shall not be permitted with the exception of glass fully-supported by and bonded to a non-glass material and glass surfaces incorporating or constituting display screens. | |
| language | English | |
| title | Standard Specification for Glass Used as a Horizontal Surface in Desks and Tables | en |
| title | ASTM F2813-18 | num |
| type | standard | |
| page | 2 | |
| status | Active | |
| tree | ASTM - ASTM International:;2023 | |
| contenttype | fulltext | |
| scope | 1.1 This specification covers performance requirements of glass used as an unenclosed horizontal surface under 44 in. (1118 mm) in height in a desk or table. 1.2 Units—The values stated in inch pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test methods referenced in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. | |
| identifier DOI | 10.1520/F2813-18R23 |