درباره ما
Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM C1183/C1183M-13
Organization:
ASTM - ASTM International
Year: 2024
Abstract: 4.1 Sealants are supplied with various rheological properties ranging from pourable liquids to nonsagging pastes. Single-component sealants are supplied ready for use upon opening the container. Multicomponent sealants are supplied as a base component(s) and a curing agent separately packaged. After mixing the two or more parts, the sealant is ready for application. This test method is intended to provide a means to measure the extrusion rate spanning the range of rheological properties. 4.2 This test method also covers the option of measuring the freeze-thaw and heat stability of such sealants. 4.3 This test method provides for an option of either a metal or plastic nozzle. It is intended that the metal nozzle be used when greater precision is required, such as in ASTM specifications. The plastic nozzle may be used for general screening of sealant properties or for developmental purposes when a large number of test specimens are being tested. 4.4 This test method measures the volume of sealant extruded over a given period of time at a given pressure (kPa or psi).
Collections
:
-
Statistics
Standard Test Method for Extrusion Rate of Elastomeric Sealants
Show full item record
| contributor author | ASTM - ASTM International | |
| date accessioned | 2024-12-17T23:29:45Z | |
| date available | 2024-12-17T23:29:45Z | |
| date copyright | 2024 | |
| date issued | 2024 | |
| identifier other | C1183_C1183M-13r24.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessionid=190419C4AB017808E65B78A0B48BF7AE/handle/yse/337942 | |
| description abstract | 4.1 Sealants are supplied with various rheological properties ranging from pourable liquids to nonsagging pastes. Single-component sealants are supplied ready for use upon opening the container. Multicomponent sealants are supplied as a base component(s) and a curing agent separately packaged. After mixing the two or more parts, the sealant is ready for application. This test method is intended to provide a means to measure the extrusion rate spanning the range of rheological properties. 4.2 This test method also covers the option of measuring the freeze-thaw and heat stability of such sealants. 4.3 This test method provides for an option of either a metal or plastic nozzle. It is intended that the metal nozzle be used when greater precision is required, such as in ASTM specifications. The plastic nozzle may be used for general screening of sealant properties or for developmental purposes when a large number of test specimens are being tested. 4.4 This test method measures the volume of sealant extruded over a given period of time at a given pressure (kPa or psi). | |
| language | English | |
| title | Standard Test Method for Extrusion Rate of Elastomeric Sealants | en |
| title | ASTM C1183/C1183M-13 | num |
| type | standard | |
| page | 3 | |
| status | Active | |
| tree | ASTM - ASTM International:;2024 | |
| contenttype | fulltext | |
| scope | 1.1 This test method covers two laboratory procedures for determining the extrusion rate of elastomeric sealants for use in building construction. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 There is no known ISO equivalent to this test method. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. | |
| identifier DOI | 10.1520/C1183_C1183M-13R24 |