درباره ما
Browsing NACE - NACE International by Title
Now showing items 1-20 of 344
-
Application of Tape Coatings for External Corrosion Protection of Buried Metal Pipelines - Item No. 21143
Abstract: Scope of standard. This standard practice presents guidelines for establishing the minimum requirements to ensure the proper selection, application, and performance of tape coatings. These coatings are used as the external ... -
Cathodic Protection Systems for the Mitigation of External Corrosion of Buried and Submerged Metallic Piping Systems at Nuclear Power Plants - Item No. 21434
Abstract: This standard presents accepted methods and practices regarding the use of CP for the control of external corrosion on buried or submerged carbon steel, stainless steel, gray cast iron, ductile cast iron, copper, and ... -
Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection - Item No. 21037
Abstract: Provides guidance and best practices to users of interim, or temporary, coatings for corrosion protection of metals, including performance criteria, selection, surface preparation and application, evaluation of coatings, ... -
Control of Internal Corrosion in Steel Pipelines and Piping Systems - Item No. 21111
Abstract: This standard presents recommended practices for the control of internal corrosion in steel pipelines and piping systems used to gather, transport, or distribute crude oil, petroleum products, or natural gas. This standard ... -
Corrosion Inhibiting Admixtures for Reinforced Concrete—A State of the Art Report - Item No. 21428
Abstract: Introduction Steel in concrete is normally protected from corrosion by the high pH of the concrete environment, which creates a stable passivation layer of iron oxides and hydroxides on the steel surface. Chlorides, ... -
Corrosion Prevention and Control Planning - Item No. 21412
Abstract: Scope and Limitations This standard was developed at the request of the U.S. Department of Defense to define the key elements/composition of what CPC planning encompasses for design, manufacturing, construction, operation ... -
Corrosion Prevention and Control Planning - Item No. 21412
Abstract: Scope and Limitations This standard was developed at the request of the U.S. Department of Defense to define the key elements/composition of what CPC planning encompasses for design, manufacturing, construction, operation ... -
Detection and Mitigation of Stray-Current Corrosion of Reinforced and Prestressed Concrete Structures - Item No. 21427
Abstract: This standard practice describes appropriate prevention and mitigation measures that can be applied to steel reinforced concrete (RC) and prestressed concrete (PC) structures that are, or can be, exposed to stray-currents ... -
Effectiveness of Cathodic Protection on Thermally Insulated Underground Metallic Structures - Item No. 24156
Abstract: The present trend in establishing an effective level of external metallic surface corrosion control is the application of a barrier coating or adhesive on the metallic surface prior to the application of a thermal insulating ... -
Electrochemical Realkalization of Steel-Reinforced Concrete— A State-of-the-Art Report - Item No. 24223
Abstract: Presents state-of-the-art information on electrochemical realkalization (ER) of conventionally reinforced concrete structures. Included are discussions of common industry practices used by design engineers to control ... -
Evaluation of Coatings Containing Conductive Carbon Additives for Use as an Anode on Atmospherically Exposed Reinforced Concrete - Item No. 21247
Abstract: This standard provides a test method to evaluate coatings containing conductive carbon additive for use as an anode on atmospherically exposed reinforced concrete. The test method primarily consists of exposing concrete ... -
Evaluation of Exterior Protective Coatings for Seawater Immersion Service - Item No:21244
Abstract: This standard test method covers liquid exterior protective coating systems for offshore platform steel structures, piers, docks, pilings, subsea valves, and wellheads at normal seawater temperature. If the steel temperature ... -
Format, Content, and Other Guidelines for Developing a Materials Selection Diagram - Item No. 21123
Abstract: An MSD summarizes material requirements for process equipment and piping in the refining, chemical processing, power, and other industries, and provides information needed for the development of piping and instrumentation ... -
Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks - Item No. 21040
Abstract: This standard presents recommended practices for applying ICCP to the internal submerged surfaces of steel tanks used for the storage of potable and reclaimed water, drinking water, irrigation water and fire protection ... -
Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures - Item No. 21043
Abstract: Scope and Limitations The provisions of this standard shall be applied by or under the direction of a Subject Matter Expert (SME) in Cathodic Protection. The SME shall be certified to NACE CP 4 or have equivalent national ... -
Inspection and Assessment of Below Grade and Groundline Corrosion on Weathering Steel on Electrical Transmission and Distribution Structures - Item No. 21433
Abstract: This standard provides requirements to: (1) help utilities identify structures that may be at a high risk for below- grade corrosion; (2) excavate and inspect the selected structures; (3) categorize the condition of ... -
Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment - Item No. 21054
Abstract: This standard provides technical and quality assurance guidelines for handling and installing nickel alloy, stainless steel, and titanium linings in air pollution control equipment such as FGD systems, ducts, and stacks. 1.2 ... -
Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate or Strontium Sulfate, or Both, from Solution (for Oil and Gas Production Systems) - Item No. 21228
Abstract: This standard describes a test method to screen scale inhibitors for their ability to prevent precipitation of BaSO4 or SrSO4, or both, from oilfield brines. The test method does not fix such critical variables as test ... -
Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment - Item No:21025
Abstract: Introduction This standard presents procedures for applying liquid coatings to the interior of various types of oilfield production equipment used primarily for the processing and storage of corrosive fluids in oilfield ... -
Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems - Item No. 21231
Abstract: This standard describes and illustrates testing procedures for measuring potentials that are used to determine whether a CP criterion is achieved at a test site on underground or submerged metallic piping systems. The ...