Abstract: This method permits the study of the repulpability of splices in water.
This method simulates the results obtained when splices are added to the stock pulper for reprocessing.

Abstract: This method (1, 2) concerns the processing of pulp by means of a laboratory beating device, the Kollergang, prior to forming handsheets, for the purpose of determining its behavior when subjected to a definite beating schedule [See also TAPPI T 200 "Laboratory Processing of Pulp (Beater Method)," TAPPI T 248 "Laboratory Beating of Pulp (PFI Mill Me...

Abstract: This method determines the resistance of surfaces of paper and paperboard to the action of abrasion, either wet or dry, by measuring abrasion loss. This test is not applicable to surfaces treated with wax or similar ...

Abstract: This method is for the analysis of limestone as used in current sulfite pulping practice.
Limestone may be in the calcite form (high in calcium) or the dolomite form (approaching the double carbonate of calcium and ...

Abstract: This purpose of this TIP is to establish definitions of twist warp, and help understand the causes of warp, and twist warp. Quality demands, and production efficiency in press/finishing are ever increasing. Greater efforts ...