درباره ما
TAPPI - TAPPI: Recent submissions
Now showing items 161-180 of 533
-
TAPPI T 403 OM
Abstract: This method is designed to measure the maximum bursting strength of paper and paper products having a bursting strength of 50 kPa up to 1200 kPa (7 psi up to 175 psi) and in the form of flat sheets of up to 0.6 mm (0.025 ...Subject(s) : Burst strength , Paper , -
TAPPI TIP 0502-15
Abstract: The choice of ceramic materials for paper machine wet ends is a difficult. This TIP is intended to introduce and explain the important factors affecting paper machine performance that should be considered when making a ...Subject(s) : Abrasion , Abrasion Resistance , Ceramics , Wet ends , -
TAPPI T 437 OM
Abstract: This method (1-3) is suited for the visual estimation of dirt in paper or paperboard in terms of equivalent black area. For dirt in pulp, see TAPPI T 213 "Dirt in Pulp."
This method is a visual inspection ... -
TAPPI T 1009 OM
Abstract: This method covers the determination of the tensile strength and elongation at break of fiber glass mats.Subject(s) : Elongation , Fiber mats , Glass fibers , Stretch , Tensile strength , -
TAPPI TIP 0404-59
Abstract: This TIP discusses intra-nip and post-nip rewet of paper in press nips and reviews options to minimize rewet. -
TAPPI T 646 OM
Abstract: This method describes a procedure for determining the brightness of clay or other mineral pigment that has been pulverized under controlled conditions and made into a uniformly compacted pigment plaque. This method is for ...Subject(s) : Brightness , Clay , Minerals , Pigment , Reflectance , -
TAPPI TIP 0404-53
Abstract: This Technical Information Paper provides application guidelines for plainwove dandy rolls, which are used for formation improvements.Subject(s) : Dandy rolls , Formation , -
TAPPI TIP 0404-04
Abstract: The purpose of the Technical Information Paper is to provide guidelines for selecting operating tension for dryer fabrics on paper machines.Subject(s) : Dryer felts , Dryers , Tension , -
TAPPI T 230 OM
Abstract: This method describes a procedure for determining the viscosity of 0.5% cellulose solutions, using 0.5M cupriethylenediamine (CED) as a solvent and a capillary viscometer. Measurements may be made on bleached cotton and ... -
TAPPI T 400 SP
Abstract: This method describes procedures for obtaining a representative sample for testing. It should be recognized that in an ideal situation the samples selected should represent a lot of paper or paperboard, container board, ...Subject(s) : Acceptability , Container boards , Fiberboards , Paper , Paperboard , Quality control , Sampling , -
TAPPI TIP 0606-26
Abstract: This TIP provides basic information for personnel to unload and store bulk concentrated sulfuric acid safely. It is vitally important that any new bulk concentrated sulfuric acid facility design be undertaken with advice ...