درباره ما
SMACNA - Sheet Metal and Air Conditioning Contractors' National Association Inc.: Recent submissions
Now showing items 21-35 of 35
-
SMACNA 1806
Abstract: This document contains accepted practices for the fabrication and installation of sheet metal lagging. This document serves to establish standard methods to fabricate and install sheet metal lagging systems. This ... -
SMACNA 1689
Abstract: PURPOSE
This text is intended to provide a thorough background in the design and installation of residential heating and air conditioning systems. Although detailed design information cannot be provided ... -
SMACNA 1858
Abstract: FOREWORD
This first edition of HVAC Sound and Vibration was developed to provide in−depth, HVAC−specific guidance in the art of sound and vibration measurement and mitigation. In ... -
SMACNA 1819
Abstract: This guide reviews the pertinent language contained in the model codes, the terminology used in the codes and other relevant documents, and the requirements of plans and specifications as: (1) developed by architects, ... -
SMACNA 1793
Abstract: FOREWORD
This seventh edition of the Architectural Sheet Metal Manual has many changes and several additions. Changes include new chapters and details on penetrations, additional and revised tables in ... -
SMACNA 1378
Abstract: PURPOSE
This manual proposes to accomplish three practical objectives:
(a) To develop minimum standards for fabrication and installation of plastic duct which can be used as a reference for contract ... -
SMACNA 1767
Abstract: The information and drawings in this manual are presented primarily to illustrate the elements of construction and installation of commercial kitchen ventilation systems. The information is intended to encourage more ... -
SMACNA 1624
Abstract: FOREWORD
As the industry has changed over the last few years, and with changes coming on the horizon, the SMACNA contractor needs to be equipped to meet these challenges. New construction is only one ... -
SMACNA 1572
Abstract: INTRODUCTION
The industrial sheet metal contractor is often required to provide a steel stack as part of the system for process exhaust ventilation.
This handbook is devoted exclusively to free-standing ... -
SMACNA 1922
Abstract: The scope of this manual includes the determination of the necessary construction details for the fabrication and installation of rectangular metallic industrial duct within the following general categories, and as further ... -
SMACNA 1546
Abstract: This manual covers the physical properties, manufacture, construction, installation and methods of testing fiberglass reinforced thermosetting plastic duct, intended for air conveyance in corrosive environments, as ... -
SMACNA TAB PROCEDURAL
Abstract: The scope of this procedural guide includes the basic elements that are required to conduct an on-site testing, adjusting, and balancing (TAB) service.
PURPOSE
This guide is intended to be used by ... -
SMACNA 1520
Abstract: The scope of this manual includes the determination of the necessary construction details for the fabrication and installation of round metallic industrial duct work within the following general categories, and as further ... -
SMACNA 1937
Abstract: FOREWORD
One definition of inspect is "to view closely and critically." In building construction the term "inspection" can encompass many other terms: completeness, code compliance, quality assurance, ...