درباره ما
SMACNA 1546
THERMOSET FRP DUCT CONSTRUCTION MANUAL - FIRST EDITION; Second Printing: February 2002
Year: 1997
Abstract: This manual covers the physical properties, manufacture, construction, installation and methods of testing fiberglass reinforced thermosetting plastic duct, intended for air conveyance in corrosive environments, as manufactured by hand lay–up, spray–up, and filament winding fabrication techniques.
• Round duct 4 to 72 in. (100 to 1800 mm) diameter
• Rectangular duct 12 to 96 in. (300 to 2400 mm) diameter
• Static pressures –30 to +30 in. wg (–7500 to +7500 Pa)
• Temperature range ambient to 180ºF (82ºC) (Depending on resin selection)
PURPOSE
This manual proposes to accomplish the following objectives:
a. To develop minimum standards for the fabrication and installation of FRP duct systems, and also as a reference for contract operations.
b. To develop a source of reference data for design engineers, industrial engineering departments, and pollution control authorities.
c. To provide a responsible source of documentation and terminology for ventilation and air conditioning equipment, establishing an accurate reference for thermoset plastics as they are used in the sheetmetal duct industry.
• Round duct 4 to 72 in. (100 to 1800 mm) diameter
• Rectangular duct 12 to 96 in. (300 to 2400 mm) diameter
• Static pressures –30 to +30 in. wg (–7500 to +7500 Pa)
• Temperature range ambient to 180ºF (82ºC) (Depending on resin selection)
PURPOSE
This manual proposes to accomplish the following objectives:
a. To develop minimum standards for the fabrication and installation of FRP duct systems, and also as a reference for contract operations.
b. To develop a source of reference data for design engineers, industrial engineering departments, and pollution control authorities.
c. To provide a responsible source of documentation and terminology for ventilation and air conditioning equipment, establishing an accurate reference for thermoset plastics as they are used in the sheetmetal duct industry.
Show full item record
| contributor author | SMACNA - Sheet Metal and Air Conditioning Contractors' National Association Inc. | |
| date accessioned | 2017-09-04T15:35:30Z | |
| date available | 2017-09-04T15:35:30Z | |
| date copyright | 06/01/1997 | |
| date issued | 1997 | |
| identifier other | OPTOLCAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessionid=47037D83FCDCAC426159DD6E273C9FCD/handle/yse/37421 | |
| description abstract | This manual covers the physical properties, manufacture, construction, installation and methods of testing fiberglass reinforced thermosetting plastic duct, intended for air conveyance in corrosive environments, as manufactured by hand lay–up, spray–up, and filament winding fabrication techniques. • Round duct 4 to 72 in. (100 to 1800 mm) diameter • Rectangular duct 12 to 96 in. (300 to 2400 mm) diameter • Static pressures –30 to +30 in. wg (–7500 to +7500 Pa) • Temperature range ambient to 180ºF (82ºC) (Depending on resin selection) PURPOSE This manual proposes to accomplish the following objectives: a. To develop minimum standards for the fabrication and installation of FRP duct systems, and also as a reference for contract operations. b. To develop a source of reference data for design engineers, industrial engineering departments, and pollution control authorities. c. To provide a responsible source of documentation and terminology for ventilation and air conditioning equipment, establishing an accurate reference for thermoset plastics as they are used in the sheetmetal duct industry. | |
| language | English | |
| title | SMACNA 1546 | num |
| title | THERMOSET FRP DUCT CONSTRUCTION MANUAL - FIRST EDITION; Second Printing: February 2002 | en |
| type | standard | |
| page | 216 | |
| status | Active | |
| tree | SMACNA - Sheet Metal and Air Conditioning Contractors' National Association Inc.:;1997 | |
| contenttype | fulltext |