درباره ما
SSPC SP 11
Power Tool Cleaning to Bare Metal
Organization:
SSPC - The Society for Protective Coatings
Year: 2012
Abstract: This standard contains the requirements for powertool cleaning steel to produce a bare metal power tool cleaned surface having a minimum 25-micrometer (1.0-mil) surface profile.
This standard is suitable where a roughened, clean, bare metal surface free of all visible oil, grease, dirt, rust, coating, oxides, mill scale, corrosion products, and other foreign matter is required, but where abrasive blasting is not feasible or permissible (see Notes 8.1 and 8.2).
This standard differs from SSPC-SP 3, Power-Tool Cleaning, in that SSPC-SP 3 requires the removal of loosely adherent materials only, and contains no requirement to expose bare metal or to achieve a minimum surface profile.
This standard differs from SSPC-SP 15, Commercial Grade Power-Tool Cleaning, in that SSPC-SP 15 allows stains to remain on the surface.
This standard is suitable where a roughened, clean, bare metal surface free of all visible oil, grease, dirt, rust, coating, oxides, mill scale, corrosion products, and other foreign matter is required, but where abrasive blasting is not feasible or permissible (see Notes 8.1 and 8.2).
This standard differs from SSPC-SP 3, Power-Tool Cleaning, in that SSPC-SP 3 requires the removal of loosely adherent materials only, and contains no requirement to expose bare metal or to achieve a minimum surface profile.
This standard differs from SSPC-SP 15, Commercial Grade Power-Tool Cleaning, in that SSPC-SP 15 allows stains to remain on the surface.
Collections
:
Show full item record
| contributor author | SSPC - The Society for Protective Coatings | |
| date accessioned | 2017-09-04T16:20:17Z | |
| date available | 2017-09-04T16:20:17Z | |
| date copyright | 07/19/2012 | |
| date issued | 2012 | |
| identifier other | TKJBBFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessionid=47037D83FCDCAC426159DD6E273C9FCD/handle/yse/83702 | |
| description abstract | This standard contains the requirements for powertool cleaning steel to produce a bare metal power tool cleaned surface having a minimum 25-micrometer (1.0-mil) surface profile. This standard is suitable where a roughened, clean, bare metal surface free of all visible oil, grease, dirt, rust, coating, oxides, mill scale, corrosion products, and other foreign matter is required, but where abrasive blasting is not feasible or permissible (see Notes 8.1 and 8.2). This standard differs from SSPC-SP 3, Power-Tool Cleaning, in that SSPC-SP 3 requires the removal of loosely adherent materials only, and contains no requirement to expose bare metal or to achieve a minimum surface profile. This standard differs from SSPC-SP 15, Commercial Grade Power-Tool Cleaning, in that SSPC-SP 15 allows stains to remain on the surface. | |
| language | English | |
| title | SSPC SP 11 | num |
| title | Power Tool Cleaning to Bare Metal | en |
| type | standard | |
| page | 4 | |
| status | Active | |
| tree | SSPC - The Society for Protective Coatings:;2012 | |
| contenttype | fulltext |