درباره ما
ISA 37.12
Specifications and Tests for Potentiometric Displacement Transducers
Organization:
ISA - International Society of Automation
Year: 1995
Abstract: This Standard covers potentiometric displacement transducers, primarily those used in measuring systems.
NOTES
1. These specifications are not intended to cover transducers used in hazardous (classified) locations as specified in the National Electric Code.
2. Transducers for use in nuclear power plants must conform to additional U.S. Nuclear Regulatory Commission Requirements not specifically called out in this Standard.
Included among the specific versions of potentiometric displacement transducers to which this Standard is applicable are the following:
Angular Displacement Transducers
Linear Displacement Transducers
Terminology used in this document is defined in ISA-S37.1. Additional terms considered applicable to potentiometric displacement transducers are defined in 4.3 of this document. An asterisk appears after those terms defined in S37.1. A double asterik appears after those terms defined in 4.3 of this standard.
Purpose
This Standard establishes the following for potentiometric displacement transducers.
Uniform minimum specifications for design and performance characteristics 2.2 Uniform acceptance and qualification test methods, including calibration techniques
Uniform presentation of minimum test data
A drawing symbol for use in electrical schematics
NOTES
1. These specifications are not intended to cover transducers used in hazardous (classified) locations as specified in the National Electric Code.
2. Transducers for use in nuclear power plants must conform to additional U.S. Nuclear Regulatory Commission Requirements not specifically called out in this Standard.
Included among the specific versions of potentiometric displacement transducers to which this Standard is applicable are the following:
Angular Displacement Transducers
Linear Displacement Transducers
Terminology used in this document is defined in ISA-S37.1. Additional terms considered applicable to potentiometric displacement transducers are defined in 4.3 of this document. An asterisk appears after those terms defined in S37.1. A double asterik appears after those terms defined in 4.3 of this standard.
Purpose
This Standard establishes the following for potentiometric displacement transducers.
Uniform minimum specifications for design and performance characteristics 2.2 Uniform acceptance and qualification test methods, including calibration techniques
Uniform presentation of minimum test data
A drawing symbol for use in electrical schematics
Collections
:
Show full item record
| contributor author | ISA - International Society of Automation | |
| date accessioned | 2017-09-04T16:14:09Z | |
| date available | 2017-09-04T16:14:09Z | |
| date copyright | 01/01/1982 (R 1995) | |
| date issued | 1995 | |
| identifier other | STNGNAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessionid=A33FFBB4A04818B251172099FA6814F7/handle/yse/77447 | |
| description abstract | This Standard covers potentiometric displacement transducers, primarily those used in measuring systems. NOTES 1. These specifications are not intended to cover transducers used in hazardous (classified) locations as specified in the National Electric Code. 2. Transducers for use in nuclear power plants must conform to additional U.S. Nuclear Regulatory Commission Requirements not specifically called out in this Standard. Included among the specific versions of potentiometric displacement transducers to which this Standard is applicable are the following: Angular Displacement Transducers Linear Displacement Transducers Terminology used in this document is defined in ISA-S37.1. Additional terms considered applicable to potentiometric displacement transducers are defined in 4.3 of this document. An asterisk appears after those terms defined in S37.1. A double asterik appears after those terms defined in 4.3 of this standard. Purpose This Standard establishes the following for potentiometric displacement transducers. Uniform minimum specifications for design and performance characteristics 2.2 Uniform acceptance and qualification test methods, including calibration techniques Uniform presentation of minimum test data A drawing symbol for use in electrical schematics | |
| language | English | |
| title | ISA 37.12 | num |
| title | Specifications and Tests for Potentiometric Displacement Transducers | en |
| type | standard | |
| page | 42 | |
| status | Active | |
| tree | ISA - International Society of Automation:;1995 | |
| contenttype | fulltext |