درباره ما
IPC - Association Connecting Electronics Industries: Recent submissions
Now showing items 61-80 of 793
-
IPC TM-650 2.1.7C
Abstract: This method is designed to determine thread count of woven glass fabric used for prepreg (resin-impregnated glass fabric, or B-stage). It is applicable for glass fabric inspection before and after impregnation. -
IPC TM-650 2.1.2A
Abstract: A method for determining the presence of pinholes in metal foil by visual examination after applying a dye penetrant. -
IPC A-610E SWEDISH
Abstract: Denna standard är en sammanställning av visuella acceptanskrav för kretskort. Detta dokument fastställer acceptanskrav för tillverkning av kretskort. Historiskt sett har kretskortsstandarder omfattat ... -
IPC TM-650 2.3.39C
Abstract: This infrared spectrophotometric analysis test method is for use in identifying the nature of nonionic organic contaminants present on printed wiring board surfaces or on the contaminated microscope slide used in the solvent ... -
IPC 2541
Abstract: The IPC-2541 standard defines an XML encoding schema to facilitate plug-and-play characteristics in a factory's shop-floor information system. This standard describes the generic event message content, and should be used ... -
IPC J-STD-001D ITALIAN
Abstract: Questo standard prescrive la pratica ed i requisiti per la realizzazione di saldature di assemblati elettrici ed elettronici. Storicamente, gli standard relativi all'assemblaggio elettronico (saldatura) contenevano spiegazioni ... -
IPC HDBK-830A
Abstract: Conformal coating, for the purpose of this document, is defined as a thin, transparent, polymeric coating that is applied to the surfaces of PCAs to provide protection from the end-use environment. Typical coating thickness ... -
IPC TM-650 2.3.35C
Abstract: This test method is designed to determine the halide content of fluxes attributable to chlorides and bromides. The halide content is reported as the weight percentage of chloride to the solid (nonvolatile) portion of the ... -
IPC TM-650 2.4.7A
Abstract: This method is designated for use in determining the ease of machining of plastic materials and the effect of such machining on the cutting tools and plastic. -
IPC T-50H CHINESE
Abstract: This document is designed to provide definitions for terms commonly used in the electronics industry which have meanings specific to electronics. The definitions are intended to provide sufficient clarity of detail such ... -
IPC 5704
Abstract: Statement of Scope This document defines the recommended general requirements for the cleanliness of unpopulated (bare) single, double-sided or multilayer printed boards.
Printed board quality encompasses ... -
IPC TM-650 2.4.23
Abstract: This test method is used to determine the resistance of laminate materials (both unclad and etched surfaces) to the thermal abuse of a solder dip. Resistance to softening, loss of surface resin, scorching, delamination, ... -
IPC WP-008
Abstract: As board shops, contract assemblers, and original equipment manufacturers (OEMs) begin to understand the power of ion chromatography (IC) as a method to improve the quality and reliability of manufactured product, more ... -
IPC 4553A
Abstract: Statement of Scope
This specification sets the requirements for the use of Immersion Silver (IAg) as a surface finish for printed circuit boards. This specification is intended to set requirements for ... -
IPC TM-650 2.6.7.3
Abstract: This test method is to determine the physical endurance of applied polymer solder mask to sudden changes of high and low temperature excursions to cause physical fatigue.