درباره ما
IPC TR-464
Accelerated Aging for Solderability Evaluations - Incorporates Addendum: December 1987
Organization:
IPC - Association Connecting Electronics Industries
Year: 1984
Abstract: ABSTRACT
There is a growing need for a method of evaluating the solderability retention capability of printed circuit parts during inventory storage. These circuit parts, including components, connectors, sockets and printed wiring boards are usually joined together by soldering, hence solderability must be preserved during inventory storage. Without accelerated aging prior to solderability testing, i.e. as with the current common practice, little information is gained concerning the future solderability of such parts.
The IPC formed a Task Group to study Accelerated Aging and recommend a method to be used for simulating long term natural storage. This group surveyed circuit manufacturers to determine what was needed, studied the technical literature on accelerated aging and determined that a suitable method is available for tin and tin/lead alloy coatings The predominant coating materials. In conducting this study, the task group critically assessed the merits of steam, damp, dry, and steam-oxygen heat aging on the basis of published supporting documentation of test results.
The Accelerated Aging Task Group recommends, for tin and tin/lead alloy coatings, a 20 to 24 hours steam aging of specimens above vigorously boiling distilled water to simulate one year natural clean environment inventory storage. This report documents these findings.
There is a growing need for a method of evaluating the solderability retention capability of printed circuit parts during inventory storage. These circuit parts, including components, connectors, sockets and printed wiring boards are usually joined together by soldering, hence solderability must be preserved during inventory storage. Without accelerated aging prior to solderability testing, i.e. as with the current common practice, little information is gained concerning the future solderability of such parts.
The IPC formed a Task Group to study Accelerated Aging and recommend a method to be used for simulating long term natural storage. This group surveyed circuit manufacturers to determine what was needed, studied the technical literature on accelerated aging and determined that a suitable method is available for tin and tin/lead alloy coatings The predominant coating materials. In conducting this study, the task group critically assessed the merits of steam, damp, dry, and steam-oxygen heat aging on the basis of published supporting documentation of test results.
The Accelerated Aging Task Group recommends, for tin and tin/lead alloy coatings, a 20 to 24 hours steam aging of specimens above vigorously boiling distilled water to simulate one year natural clean environment inventory storage. This report documents these findings.
Collections
:
Show full item record
| contributor author | IPC - Association Connecting Electronics Industries | |
| date accessioned | 2017-09-04T18:47:08Z | |
| date available | 2017-09-04T18:47:08Z | |
| date copyright | 04/01/1984 | |
| date issued | 1984 | |
| identifier other | KLGOCAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessioutho1513AF679D40527369728F1ED52F014A/handle/yse/228335 | |
| description abstract | ABSTRACT There is a growing need for a method of evaluating the solderability retention capability of printed circuit parts during inventory storage. These circuit parts, including components, connectors, sockets and printed wiring boards are usually joined together by soldering, hence solderability must be preserved during inventory storage. Without accelerated aging prior to solderability testing, i.e. as with the current common practice, little information is gained concerning the future solderability of such parts. The IPC formed a Task Group to study Accelerated Aging and recommend a method to be used for simulating long term natural storage. This group surveyed circuit manufacturers to determine what was needed, studied the technical literature on accelerated aging and determined that a suitable method is available for tin and tin/lead alloy coatings The predominant coating materials. In conducting this study, the task group critically assessed the merits of steam, damp, dry, and steam-oxygen heat aging on the basis of published supporting documentation of test results. The Accelerated Aging Task Group recommends, for tin and tin/lead alloy coatings, a 20 to 24 hours steam aging of specimens above vigorously boiling distilled water to simulate one year natural clean environment inventory storage. This report documents these findings. | |
| language | English | |
| title | IPC TR-464 | num |
| title | Accelerated Aging for Solderability Evaluations - Incorporates Addendum: December 1987 | en |
| type | standard | |
| page | 26 | |
| status | Active | |
| tree | IPC - Association Connecting Electronics Industries:;1984 | |
| contenttype | fulltext |