درباره ما
SAE - SAE International: Recent submissions
Now showing items 741-760 of 16264
-
Test for Tire Quasi-Static Longitudinal Force versus Longitudinal Displacement and Quasi-Static Lateral Force versus Lateral Force
Abstract: This SAE Recommended Practice describes application of two closely related test procedures, which together determine the linear range longitudinal and lateral stiffnesses of a statically loaded non-rotating tire. The ... -
Shoreline Sound Level Measurement Procedure for Recreational Motorboats
Abstract: This SAE Recommended Practice establishes the procedure for measuring the sound level of recreational motorboats in the vicinity of a shore bordering any recreational boating area during which time a boat is operating under ... -
Combination 11 Conductors and 2 Pairs ECBS Cable
Abstract: This SAE standard establishes the minimum construction and performance requirements for a combination cable consisting of 11 conductors and 2 twisted pairs for use on trucks, trailers, and dollies in conjunction with SAE ... -
Automotive Compacted Graphite Iron Castings
Abstract: This SAE Standard covers the mechanical and physical requirements for Compacted Graphite Iron (CGI) castings used in automotive and allied industries. Requirements in this document include:aTensile StrengthbYield ... -
Comprehensive Life Test for 12 V Automotive Storage Batteries
Abstract: This SAE Standard applies to 12 V, flooded and absorptive glass mat lead acid automotive storage batteries of 200 minutes or less reserve capacity and cold crank capacity greater than 200 amperes.This life test is considered ... -
Diagnostic Link Connector Security
Abstract: This document describes some of the actions that should be taken to help ensure safe vehicle operation in the case that any such connected device (external test equipment, connected data collection device) has been compromised ... -
Hydrodynamic Drive Test Code
Abstract: The range of test conditions on the dynamometer shall be sufficient to determine the primary operating characteristics corresponding to the full range of vehicle operations.The characteristics to be determined are:aTorque ... -
Test Procedure for Battery Flame Retardant Venting Systems
Abstract: This SAE Standard details procedures for testing lead-acid SLI (starting, lighting, and ignition), heavy-duty, EV (electric vehicle), and RV (recreational vehicle) batteries, to determine the effectiveness of the battery ... -
On-Highway Equipment Control and Communication Network
Abstract: SAE J1939-1 On-Highway Equipment Control and Communication Network specifies the minimum set of SAE J1939 documents that define the Truck and Bus Control and Communications Vehicle Network as it applies to on-highway ... -
Coolant Hose (Supplement to SAE J20 for Government Use Replacing Part of MS52130)
Abstract: This SAE Standard provides ordering information for any SAE 20R1 through SAE 20R4 hose type (such as EC, HT, LT, or combination thereof.) It is a supplement for Government use but may be used by others. -
Braking Performance - Asphalt Pavers
Abstract: This SAE Standard specifies brake system performance and test criteria to enable uniform evaluation of the braking capability of self-propelled, rubber-tired and tracked asphalt pavers. Service, secondary, and parking ... -
Radiator Caps and Filler Necks
Abstract: This SAE Standard was developed primarily for passenger car and truck application, but may be used in marine, industrial, and similar applications. -
Microscopic Determination of Inclusions in Steels
Abstract: This recommended microscopic practice for evaluating the inclusion content in steel has been developed as a practical method of quantitatively determining the degree of cleanliness of steel. This method has been established ... -
Determination of the Maximum Available Power from a Rechargeable Energy Storage System on a Hybrid Electric Vehicle
Abstract: This document describes a test procedure for rating peak power of the Rechargeable Energy Storage System (RESS) used in a combustion engine Hybrid Electric Vehicle (HEV). Other types of vehicles with non fossil fuel primary ... -
Performance Specification for Welded Wire-to-Wire Splices
Abstract: SAE/USCAR-45 defines test methods and performance requirements for ultrasonically-welded wire-to-wire splices for automotive applications. Face-to-face, butt splice, and center strip configurations per Figure 1 can be ... -
Industry Review of xEV Battery Size Standards
Abstract: This Technical Information Report (TIR) will review the global industry battery size standards for xEV vehicles to provide guidance on available cell sizes for engineers developing battery powered vehicles. The TIR will ... -
Exterior Sound Level Measurement Procedure for Recreational Motorboats
Abstract: This SAE Recommended Practice establishes the procedure for measuring the maximum exterior sound level of recreational motorboats while being operated under a variety of operating conditions. It is intended as a guide ... -
Methods for Testing Snap-In Tubeless Tire Valves
Abstract: This SAE Standard contains recommended test methods for snap-in tubeless tire valves intended for, but not limited to, highway applications. A snap-in valve is a tire valve having a rigid housing adhered to a resilient ... -
Motorcycle Auxiliary Front Lamps
Abstract: This engineering design specification provides parameters and general requirements for auxiliary front lamps to be used on motorcycles. -
Function Performance Status Classification for EMC Immunity Testing
Abstract: This SAE Standard provides a general method for defining the acceptable function performance status classification for the functions of automotive electronic devices upon application of the test conditions specified as ...