درباره ما
DIN EN ISO 17161
English -- Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014);
German -- Hochleistungskeramik - Keramische Verbundwerkstoffe - Bestimmung der Fluchtungsfehler bei mechanischen Pruefungen mit einachsiger Beanspruchung (ISO 17161:2014)
Organization:
DIN - Deutsches Institut fš?r Normung e. V.
Year: 2016
Abstract: Scope: This International Standard describes a procedure — to verify the degree of misalignment of the load train of the test machines using a reference test specimen uniformly loaded in tension or in compression, and — to give indications in order to correct defects such as torsion and bending. This International Standard is not intended to provide a quantitative and acceptable limit before the testing of ceramic matrix composites with a fibre reinforcement: unidirectional (1D), bidirectional (2D), and tridirectional (xD, with 2 < x ≤ 3) loaded along one principal axis of reinforcement. This limit depends on the sensitivity of each type of composite to the misalignment defect. NOTE 1 This limit is to be defined between the testing establishment and the customer. NOTE 2 Monolithic ceramics are very sensitive to misalignment defects while CMCs (ceramic matrix composite) in general are moderately sensitive to them
Collections
:
-
Statistics
DIN EN ISO 17161
Show full item record
| contributor author | DIN - Deutsches Institut fš?r Normung e. V. | |
| date accessioned | 2017-10-18T11:12:08Z | |
| date available | 2017-10-18T11:12:08Z | |
| date copyright | 2016.10.01 | |
| date issued | 2016 | |
| identifier other | ZVAKSFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessioutho9193177793325273135A68A10958014/handle/yse/236365 | |
| description abstract | Scope: This International Standard describes a procedure — to verify the degree of misalignment of the load train of the test machines using a reference test specimen uniformly loaded in tension or in compression, and — to give indications in order to correct defects such as torsion and bending. This International Standard is not intended to provide a quantitative and acceptable limit before the testing of ceramic matrix composites with a fibre reinforcement: unidirectional (1D), bidirectional (2D), and tridirectional (xD, with 2 < x ≤ 3) loaded along one principal axis of reinforcement. This limit depends on the sensitivity of each type of composite to the misalignment defect. NOTE 1 This limit is to be defined between the testing establishment and the customer. NOTE 2 Monolithic ceramics are very sensitive to misalignment defects while CMCs (ceramic matrix composite) in general are moderately sensitive to them | |
| language | English | |
| title | DIN EN ISO 17161 | num |
| title | English -- Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014) | en |
| title | German -- Hochleistungskeramik - Keramische Verbundwerkstoffe - Bestimmung der Fluchtungsfehler bei mechanischen Pruefungen mit einachsiger Beanspruchung (ISO 17161:2014) | other |
| type | standard | |
| page | 16 | |
| status | Active | |
| tree | DIN - Deutsches Institut fš?r Normung e. V.:;2016 | |
| contenttype | fulltext |