درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 1181-1200 of 9213
-
IEC 62979
Abstract: This document provides a method for evaluating whether a bypass diode as mounted in the module is susceptible to thermal runaway or if there is sufficient cooling for it to survive the transition from forward bias operation ... -
-
IEC 62973-1
Abstract: This part of IEC 62973 applies to various rechargeable battery technologies for auxiliary power supply systems used on rolling stock. This document applies to any rolling stock types (e.g. light rail vehicles, tramways, ... -
IEC 60127-8
Abstract: This part of IEC 60127 relates to fuse resistors with particular overcurrent protection rated up to AC 500 V and/or DC 500 V for printed circuits and other substrate systems, used for the protection of electric appliances, ... -
IEC 60811-410
Abstract: This Part 410 of IEC 60811 gives the procedure for copper-catalyzed oxidative degradation of a polyolefin, which is typically used for insulation in communication cables. Full test conditions, such as temperature, duration, ... -
IEC 62955
Abstract: This International Standard applies to residual direct current detecting devices (RDC-DD) for permanently connected AC electric vehicle charging stations (mode 3 charging of electric vehicles, according to IEC 61851-1 and ... -
IEC TS 63014-1
Abstract: This Technical Specification is intended to provide an overall and consistent set of guidelines to facilitate the specification of equipment for the DC-side of a high-voltage direct current (HVDC) system using line-commutated ... -
IEC 62988
Abstract: This document establishes requirements relevant to the selection and use of wireless devices in instrumentation and control (I&C) systems important to safety used in nuclear power plants (NPPs). Those I&C systems ... -
IEC TS 60479-2 (REDLINE + STANDARD)
Abstract: This part of IEC 60479 describes the effects on the human body when a sinusoidal alternating current in the frequency range above 100 Hz passes through it. The effects of current passing through the human body for: – ... -
IEC 60317-74
Abstract: This part of IEC 60317 specifies the requirements of enamelled rectangular aluminium winding wire of class 180 with a sole coating based on polyesterimide resin, which can be modified providing it retains the chemical ... -
IEC 61340-4-5
Abstract: This part of IEC 61340 specifies test methods for evaluating electrostatic protection provided by a system of footwear and flooring in combination with a person. Test results are valid only for the specific footwear and ... -
IEC 62986
Abstract: This document sets the general and dimensional interchangeability requirements for plugs, socket-outlets, connectors and appliance inlets with arcuate contacts of standardized configurations (hereinafter referred to as ... -
-
IEC 63049
Abstract: This document provides the minimum activities deemed necessary to implement an effective Quality Assurance program for the managing and reducing of risk in the installation and operation of photovoltaic (PV) systems. This ... -
IEC 62677-3-101
Abstract: This part of IEC 62677 is applicable to heat shrinkable low voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, ... -
IEC 60191-1
Abstract: This part of IEC 60191 gives guidelines on the preparation of outline drawings of discrete devices, including discrete surface-mounted semiconductor devices with lead count less than 8. For the preparation of outline ... -
IEC 60721-3-1
Abstract: This part of IEC 60721 classifies the groups of environmental parameters and their severities to which products together with their packaging, if any, are subjected when stored. The environmental conditions specified in ... -
IEC 60793-1-45 (REDLINE + STANDARD)
Abstract: This part of IEC 60793 establishes uniform requirements for measuring the mode field diameter (MFD) of single-mode optical fibre, thereby assisting in the inspection of fibres and cables for commercial purposes. -
IEC 60079-0 (REDLINE + STANDARD)
Abstract: This part of IEC 60079 specifies the general requirements for construction, testing and marking of Ex Equipment and Ex Components intended for use in explosive atmospheres. The standard atmospheric conditions (relating to ... -
IEC 62817
Abstract: Scope and object This International Standard is a design qualification standard applicable to solar trackers for photovoltaic systems, but may be used for trackers in other solar applications. The standard defines test ...