درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 1221-1240 of 9213
-
IEC TS 62862-1-3
Abstract: The goal of this document on data format is to reduce efforts for data exchange and to avoid errors caused by misunderstandings due to the application of various different and at times unclear formats. To achieve this goal, ... -
IEC 60077-1 (REDLINE + STANDARD)
Abstract: This part of IEC 60077 specifies the general service conditions and requirements for all electric equipment installed in power circuits, auxiliary circuits, control and indicating circuits etc., on railway rolling stock. ... -
-
IEC TR 63123
Abstract: This document gives guidance for the application in the IAEA/IEC framework of the IEC 63147:2017/IEEE 497 corresponding to the adoption without modification of IEEE 497:2016. During their review of IEEE 497:2016, the experts ... -
IEC 60728-2
Abstract: This part of IEC 60728: • applies to the radiation characteristics and immunity to electromagnetic disturbance of EM-active equipment (active and passive equipment) for the reception, processing and distribution of ... -
IEC 62386-221
Abstract: This part of IEC 62386 specifies the methodology of demand response which focuses on the curtailment of electric loads during peak demand times thus avoiding the requirement to find new sources of generation capacity. By ... -
IEC 60335-2-60 (REDLINE + STANDARD)
Abstract: This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric whirlpool baths for indoor use and whirlpool spas, for household and similar purposes, their rated voltage ... -
IEC 60286-5
Abstract: This part of IEC 60286 describes the common dimensions, tolerances and characteristics of the tray. It includes only those dimensions that are essential for the handling of the trays for the stated purpose and for placing ... -
IEC 63024
Abstract: This International Standard applies to automatic reclosing devices (ARDs) for household and similar uses, for rated voltage not exceeding 440 V AC, and which are intended to be used in combination with circuit-breakers, ... -
IEC 60335-2-95
Abstract: This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage ... -
IEC TS 62561-8
Abstract: This document specifies the requirements and tests for insulating stand-offs, used in conjunction with an air-termination system and down-conductors with the aim of maintaining the proper separation distance, and the ... -
IEC 62489-1
Abstract: This part of the IEC 62489 series applies to the components of audio-frequency induction-loop systems for assisted hearing. It may also be applied to such systems used for other purposes, as far as it is applicable. This ... -
IEC 61071
Abstract: This International Standard applies to capacitors for power electronics applications. The operating frequency of the systems in which these capacitors are used is usually up to 15 kHz, while the pulse frequencies may be ... -
IEC 60772
Abstract: This document applies to electrical penetration assemblies (EPAs) in containment structures of nuclear power plants. It covers the engineering safety requirements to be met in the design, calculation, qualification, ... -
IEC 60331-1 (REDLINE + STANDARD)
Abstract: This part of IEC 60331 specifies the test method for cables which are required to maintain circuit integrity when subject to fire and mechanical shock under specified conditions. This document is applicable to cables of ... -
IEC 60335-2-86
Abstract: This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric fishing machines by means of which water ... -
-
IEC 60077-2
Abstract: In addition to the rules given in IEC 60077-1, this part of IEC 60077 provides general rules for all electrotechnical components installed in power circuits, auxiliary circuits, control and indicating circuits, etc., on ... -
IEC 61375-2-6
Abstract: This part of IEC 61375 establishes the specification for the communication between the onboard subsystems and the ground subsystems. The communication system, interfaces and protocols are specified as a mobile communication ... -
IEC 61755-6-2
Abstract: This part of the IEC 61755 defines the dimensional limits of an optical interface for reference connectors necessary to meet specific requirements for fibre-to-fibre interconnection of nonangled polished multimode reference ...