درباره ما
IEC - International Electrotechnical Commission: Recent submissions
Now showing items 1461-1480 of 9213
-
-
IEC TS 61970-556
Abstract: Scope: This part of IEC 61970, which is a technical specification, specifies a CIM-based graphic exchange format (CIM/G). It includes graphic file structure and graphic element definitions. This document supports a mechanism ... -
IEC 61753-381-6
Abstract: Scope: This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a Gaussian-passband-profile cyclic arrayed waveguide grating (AWG) for single bidirectional transmission ... -
IEC 62793
Abstract: Scope: This International Standard describes the characteristics of thunderstorm warning systems and evaluation of the usefulness of lightning real time data and/or storm electrification data in order to implement lightning ... -
IEC 60794-1-2
Abstract: Scope: This part of IEC 60794-1 applies to optical fibre cables for use with telecommunications equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical ... -
IEC TR 63021
Abstract: Scope: This document presents technical characteristics, application results and practical information on NG-brush for slip-ring obtained through the application of NG-brush in various kinds of wound rotor-type induction ... -
IEC TS 62282-7-1
Abstract: Scope: This document covers cell assemblies, test station setup, measuring instruments and measuring methods, performance test methods, and test reports for PEFC single cells. This document is used for evaluating: the ... -
-
IEC 60335-2-34
Abstract: Scope: This clause of Part 1 is replaced by the following. This International Standard deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which ... -
IEC 61010-2-030
Abstract: Scope: This clause of Part 1 is applicable except as follows: Equipment included in scope Replacement: Replace the text with the following: This group safety publication is primarily intended to be used as a product safety ... -
IEC TS 62257-9-5 (REDLINE + STANDARD)
Abstract: Scope: This part of IEC 62257, which is a Technical Specification, applies to stand-alone rechargeable electric lighting appliances or kits that can be installed by a typical user without employing a technician. This part ... -
-
IEC 61084-2-2
Abstract: Scope: This part of the IEC 61084 series specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective ... -
IEC TR 62343-6-4
Abstract: Scope: This part of IEC 62343, which is a Technical Report on reconfigurable optical add/drop multiplexers (ROADMs), provides a description of the ROADMs in dynamic optical networks and related optical component and module ... -
IEC 61010-2-034
Abstract: Scope: This clause of Part 1 is applicable except as follows: Equipment included in scope Replacement: Replace the text with the following: This group safety publication is primarily intended to be used as a product safety ... -
IEC 61010-1
Abstract: Scope: Equipment included in scope This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the ... -
IEC PAS 63088
Abstract: Scope: This document, which is a PAS, describes a reference architecture model in the form of a cubic layer model, which shows technical objects (assets) in the form of layers, and allows them to be described, tracked over ... -
IEC CISPR 16-2-3 (REDLINE + STANDARD)
Abstract: Scope: This part of CISPR 16 specifies the methods of measurement of radiated disturbance phenomena in the frequency range of 9 kHz to 18 GHz. The aspects of measurement uncertainty are specified in CISPR 16-4-1 and CISPR ... -
IEC 61753-052-3
Abstract: Scope: This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a fibre optic attenuator satisfies in order to be categorised as meeting the requirements of single-mode ... -
IEC 61290-4-1
Abstract: Scope: This part of IEC 61290-4 applies to optical amplifiers (OAs) using active fibres (optical fibre amplifiers (OFAs)) containing rare-earth dopants including erbium-doped fibre amplifiers (EDFAs) and optically amplified ...