درباره ما
L-T-100B
TAPE, PRESSURE-SENSITIVE ADHESIVE, POLYESTER FILM
Organization:
GSA - FSS - Federal Supply Service
Year: 1988
Abstract: This specification defines the requirements for pressure-sensitive tapes possessing a high degree of stability, solvent resistance, and designed for applications where the properties of a polyester film are desired (see 6.1). Intended Use: Type I tape is intended for uses where a high degree of resistance to solvents, oils and hydraulic fluid is required. Examples of such applications are in dissimilar metal separation on aircraft and covering of pressure-sensitive identification tapes used on fluid lines and wiring harnesses in aircraft, missiles and vehicles. It is also recommended for covering labels on shipping containers where exterior exposure is anticipated. Printing on the adhesive side of type 1 tape is intended for use where the printed message must be protected from weathering, solvents and abrasion. Type II tape is intended for uses where weather resistant, long aging label (printed form) or decorative stripping or color coding is required. For a solvent resistant printed label, Type II, printed, and overlaid with Type I tape should be used.
Collections
:
Show full item record
| contributor author | GSA - FSS - Federal Supply Service | |
| date accessioned | 2017-09-04T17:14:16Z | |
| date available | 2017-09-04T17:14:16Z | |
| date copyright | 07/12/1988 | |
| date issued | 1988 | |
| identifier other | ZADTDAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessiouthor:%22NAVY%20-%20YD%20-/handle/yse/137703 | |
| description abstract | This specification defines the requirements for pressure-sensitive tapes possessing a high degree of stability, solvent resistance, and designed for applications where the properties of a polyester film are desired (see 6.1). Intended Use: Type I tape is intended for uses where a high degree of resistance to solvents, oils and hydraulic fluid is required. Examples of such applications are in dissimilar metal separation on aircraft and covering of pressure-sensitive identification tapes used on fluid lines and wiring harnesses in aircraft, missiles and vehicles. It is also recommended for covering labels on shipping containers where exterior exposure is anticipated. Printing on the adhesive side of type 1 tape is intended for use where the printed message must be protected from weathering, solvents and abrasion. Type II tape is intended for uses where weather resistant, long aging label (printed form) or decorative stripping or color coding is required. For a solvent resistant printed label, Type II, printed, and overlaid with Type I tape should be used. | |
| language | English | |
| title | L-T-100B | num |
| title | TAPE, PRESSURE-SENSITIVE ADHESIVE, POLYESTER FILM | en |
| type | standard | |
| page | 9 | |
| status | Active | |
| tree | GSA - FSS - Federal Supply Service:;1988 | |
| contenttype | fulltext |