درباره ما
ASME - ASME International: Recent submissions
Now showing items 101-120 of 1083
-
Hydrogen Piping and Pipelines
Abstract: Paragraph GR-3.9.2 was inadvertently omitted from ASME B31.12-2019, page 48. Pipe may be bent and components may be formed by any hot or cold method that is suitable for the material, the intended service, and the severity ... -
Refrigeration Piping and Heat Transfer Components
Abstract: Rules for this Code Section have been developed considering the needs for applications that include piping and heat transfer components for refrigerants and secondary coolants. This Code prescribes requirements for the ... -
Surface Texture (Surface Roughness, Waviness, and Lay)
Abstract: This Standard is concerned with the geometric irregularities of surfaces. It defines surface texture and its constituents: roughness, waviness, and lay. It also defines parameters for specifying surface texture. The ... -
Malleable Iron Threaded Pipe Unions Classes 150, 250, and 300
Abstract: This Standard covers threaded malleable iron unions, Classes 150, 250, and 300. It also contains provisions for using steel for NPS 1∕8 unions. This Standard includes (a) design (b) pressure–temperature ratings (c) ... -
Hydromassage bathtub systems
Abstract: This Standard specifies general requirements, test methods, and markings for whirlpool and air-jetted bathtubs and suction fittings used in hydromassage bathtub systems that incorporate a bathtub and circulation pump. The ... -
Glossary of Terms for Mechanical Fasteners
Abstract: This Standard is a summary of mechanical fastener terminology, related characteristics, and manufacture. (a) Fastener. A fastener is a mechanical device designed specifically to hold, join, couple, assemble, or maintain ... -
English -- Standard Toughness Requirements for Piping
Abstract: Scope: INTRODUCTION This Code provides requirements for evaluating the suitability of materials used in piping systems for piping that may be subject to brittle failure due to low-temperature service conditions. While ... -
English -- Standard for the Qualification of Elevator Inspectors
Abstract: Scope: Inspectors and Inspector Supervisors This Standard includes requirements for the qualification, duties, and responsibilities of inspectors and inspector supervisors engaged in the inspection and testing of (a) ... -
English -- Standard for Elevator Suspension, Compensation, and Governor Systems
Abstract: Scope: Part 1 covers the general requirements for the more common types of stranded steel wire ropes for hoisting, compensation, and governor applications on passenger or freight elevators. Included in the scope of this ... -
English -- Safety Standard for Conveyors and Related Equipment
Abstract: Scope: This Standard applies to the design, construction, installation, maintenance, inspection, and operation of conveyors and conveying systems in relation to hazards. The conveyors may be of the bulk material, package, ... -
English -- Below-the-Hook Lifting Devices
Abstract: Scope: Volume B30.20 includes provisions that apply to the marking, construction, installation, inspection, testing, maintenance, and operation of below-the-hook lifting devices, other than components addressed by other ... -
English -- Ceramic plumbing fixtures - Errata: October 2018
Abstract: Scope: This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard’s performance requirements and ... -
English -- Macerating toilet systems and waste-pumping systems for plumbing fixtures
Abstract: Scope: This Standard specifies requirements for materials, construction, performance, testing, and markings for macerating toilet systems and waste-pumping systems for plumbing fixtures. Such systems are intended to collect, ... -
English -- Mobile and Locomotive Cranes
Abstract: Scope: Within the general scope defined in Section I of the B30 Standard Introduction, American National Standard B30.5 applies to crawler cranes, locomotive cranes, wheelmounted cranes, and any variations thereof that ... -
English -- Repair of Pressure Equipment and Piping
Abstract: Scope: This Standard provides methods for repair of equipment, piping, pipelines, and associated ancillary equipment within the scope of ASME Pressure Technology Codes and Standards1 after they have been placed in service. ... -
English -- Aerospace and Advanced Engineering Drawings
Abstract: Scope: This Standard provides a method to document requirements that are common across aerospace and other industries that use advanced manufacturing technologies. This Standard offers symbologies, terminologies, and ... -
English -- Factory-Made Wrought Buttwelding Fittings
Abstract: Scope: General This Standard covers overall dimensions, tolerances, ratings, testing, and markings for factory-made wrought buttwelding fittings in sizes NPS 1∕2 through NPS 48 (DN 15 through DN 1200). -
English -- Power Piping
Abstract: Scope: Rules for this Code Section have been developed considering the needs for applications that include piping typically found in electric power generating stations, in industrial and institutional plants, geothermal ... -
English -- Gas Transmission and Distribution Piping Systems
Abstract: Scope: This Code covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. This Code also covers safety aspects of the operation and maintenance of ... -
English -- Qualifications for Authorized Inspection
Abstract: Scope: FOREWORD The 2018 Edition of ASME QAI-1 incorporates the 2016 Edition of QAI-1 and revisions and additions approved by the QAI Standards Committee since the publication of the 2016 Edition. This Standard is arranged ...