درباره ما
ASME - ASME International: Recent submissions
Now showing items 81-100 of 1083
-
Safety Standard for Portable Automotive Service Equipment
Abstract: Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in codes and standards. ... -
Cast Iron Threaded Drainage Fittings
Abstract: This Standard for cast iron threaded drainage fittings covers (a) sizes and method of designating openings in reducing fittings (b) marking (c) material (d) dimensions and tolerances (e) threading (f) ribs (g) ... -
Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
Abstract: SCOPE OF ASME B30.10 Volume B30.10 includes provisions that apply to the fabrication, attachment, use, inspection, and maintenance of hooks shown in Chapters 10-1 and 10-2 used for load handling purposes, in conjunction ... -
Hydrogen Piping and Pipelines
Abstract: This Code is applicable to piping in gaseous and liquid hydrogen service and to pipelines in gaseous hydrogen service. This Code is applicable up to and including the joint connecting the piping to associated pressure ... -
Planning for Load Handling Activities
Abstract: This Standard establishes planning considerations and practices that apply to load handling equipment (LHE), other associated equipment, and activities when moving loads vertically orhorizontally. Theplanning guidance ... -
Safety Code for Elevators and Escalators Includes Requirements for Elevators, Escalators, Dumbwaiters, Moving Walks, Material Lifts, and Dumbwaiters With Automatic Transfer Devices
Abstract: Equipment Covered by This Code This Code covers the design, construction, operation, inspection, testing, maintenance, alteration, and repair of the following equipment and its associated parts, rooms, spaces, and hoistways, ... -
Quality Assurance Requirements for Nuclear Facility Applications
Abstract: PURPOSE Part I — this Part — establishes requirements for the development and implementation of a Quality Assurance Program (QAP) for nuclear facility applications. It is arranged by Requirements 1 through 18. Part II ... -
Reinforced Thermoset Plastic Corrosion-Resistant Equipment
Abstract: (a) This Standard applies to stationary vessels used for the storage, accumulation, or processing of corrosive or other substances at pressures not exceeding 15.0 psig (103 kPag) external and/or 15.0 psig (103 kPag) internal ... -
Guide for Elevator Seismic Design
Abstract: This Technical Report provides rationale for elevator seismic force determination in ASME A17.1/CSA B44, Section 8.4. It details ASME A17.1/CSA B44 harmonization efforts with all building codes and summarizes the harmonization ... -
Creep-Fatigue Flaw Growth Analysis to Support Elevated Temperature Flaw Size Acceptance Criteria
Abstract: TerraPower, LLC is the Independent Consultant hired by ASME ST-LLC to analyze a matrix of typical elevated temperature components using recognized creep-fatigue flaw growth analysis methods and data. The scope of the work ... -
Safety Standard for Thermal Energy Storage Systems: Molten Salt
Abstract: This Standard establishes requirements for the design, construction, installation, inspection, testing, commissioning, maintenance, operation, and decommissioning of molten salt thermal energy storage (TES) systems. Molten ... -
Reliability, Availability, and Maintainability of Equipment and Systems in Power Plants
Abstract: This Standard identifies the elements and responsibilities required to establish a RAM program for any power-generation facility. The program process includes (a) establishment of RAM goals (b) development of requirements ... -
Operation and Maintenance of Nuclear Power Plants
Abstract: GENERAL In 2008, the OM Committee directed that the two separately published OM Code and the OM Standards and Guides (OM-S/G) publications be combined into one document. This was done to ensure all of our standards and ... -
Evolution of Quality Assurance Principles and Requirements in the U.S. Nuclear Industry
Abstract: This Section describes the evolution of nuclear quality assurance from early quality control and inspection requirements for AEC nuclear weapons production and naval reactors programs; to the more comprehensive quality ... -
Pliers and Shears
Abstract: This Standard provides performance and safety requirements for pliers suitable for cutting wire; for long-nose, long-reach pliers; for hand shears generally used for cutting sheet metal; for wire-twister pliers, which are ... -
Performance Standard for Air Chain Hoists
Abstract: This Standard establishes performance requirements for air-powered chain hoists for vertical lifting service involving material handling of freely suspended (unguided) loads using load chain of the roller or welded link ... -
Flat Wrenches
Abstract: This Standard provides performance and safety requirements for combination, open end, box, and flare nut wrenches; open end adjustable wrenches, with rack and worm adjustment, generally used on both hexagonal and square ... -
Guidelines for the Evaluation of Uncertainty of Test Values Associated With the Verification of Dimensional Measuring Instruments to Their Performance Specifications
Abstract: This Standard provides guidelines for evaluating the uncertainty of test values obtained when verifying dimensional measuring instruments1 to an ASME B89 testing protocol. The scope is limited to the case in which the ... -
Environmental Effects on Coordinate Measuring Machine Measurements
Abstract: This Technical Report discusses important influences of the environment on dimensional and geometric measurements performed using coordinate measuring machines (CMMs), including influences on both the machine and the ... -
Gages and Mandrels for Wrench Openings
Abstract: This Standard establishes final inspection gage sizes and test mandrel sizes for wrench openings and spark plug wrench openings for inch and metric sizes. This Standard does not cover every available size, only those most ...