درباره ما
ASME - ASME International: Recent submissions
Now showing items 141-160 of 1083
-
English -- Plumbing supply fittings - Errata: October 2018
Abstract: Scope: This Standard covers plumbing supply fittings and accessories located between the supply stop and the terminal fitting, inclusive, as follows: a) automatic compensating valves for individual wall-mounted showering ... -
English -- Performance Standard for Electric Chain Hoists
Abstract: Scope: (a) This Standard establishes performance requirements for electric chain hoists for vertical lifting service involving material handling of freely suspended (unguided) loads using load chain of the roller or welded ... -
English -- Struck Tools
Abstract: Scope: This Standard provides performance and safety requirements for struck tools, including splitting wedges; glaziers’ chisels; wood chisels; ripping chisels; flooring/electricians’ chisels; handheld screw ... -
English -- YIELD STRENGTH VALUES UP TO MAXIMUM TEMPERATURE DESIGN
Abstract: Scope: INTRODUCTION In ASME BPVC Section VIII Division 1, the yield strength (Sy) is used directly, or indirectly through the allowable primary and secondary stress limit (SPS = max [3S, 2Sy]), and in many of the design ... -
English -- Pipeline Personnel Qualification
Abstract: Scope: This Standard establishes the requirements for developing and implementing an effective Pipeline Personnel Qualification Program (qualification program) utilizing a combination of technically based data, accepted ... -
English -- Cast Copper Alloy Threaded Fittings Classes 125 and 250
Abstract: Scope: This Standard covers cast Classes 125 and 250 copper alloy threaded pipe fittings with provisions for substituting wrought copper alloys for plugs, bushings, caps, and couplings in small sizes. This Standard includes ... -
English -- Controls and Safety Devices for Automatically Fired Boilers
Abstract: Scope: The rules of this Standard cover requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas–oil, ... -
English -- Body Repair Tools
Abstract: Scope: This Standard provides performance and safety requirements for body repair hammers, dolly blocks, and spoons that are intended specifically for the reshaping of sheet metal panels normally found on bodies and fenders ... -
English -- Surface Texture Symbols
Abstract: Scope: This Standard establishes methods to designate surface texture controls. It includes symbolic and textual methods for specifying roughness, waviness, and other surface texture information on drawings, in specifications, ... -
ASME A112.19.3
Abstract: This Standard covers plumbing fixtures made of stainless steel alloys and specifies requirements for materials, construction, performance, testing, and markings. Note: The term “corrosion-resisting steel” is ... -
ASME PTC 53
Abstract: Types of Systems to Which This Code May Apply This Code applies to mechanical or thermal ESS including, but not limited to, compressed air, flywheel, molten salt, and pumped hydromechanical ESS and sensible, latent, ... -
ASME Y14.46
Abstract: This Draft Standard hereafter referred to as "Standard," covers definitions of terms and features unique to additive manufacturing (AM) technologies with recommendations for their uniform specification in product definition ... -
ASME PTB-11
Abstract: INTRODUCTION When the European Commission (EC) PED 97/23/CE was adopted in May 1997, it became clear that pressure equipment designed and built to standards other than European standards could carry the “CE” ... -
ASME A112.19.3
Abstract: This Standard covers plumbing fixtures made of stainless steel alloys and specifies requirements for materials, construction, performance, testing, and markings. Note: The term “corrosion-resisting steel” is ... -
-
ASME RTP-1
Abstract: (a) This Standard applies to stationary vessels used for the storage, accumulation, or processing of corrosive or other substances at pressures not exceeding 15 psig external and/or 15 psig internal above any hydrostatic ... -
ASME B16.52
Abstract: Standard Fittings. This Standard covers ratings, dimensions, tolerances, marking, and material requirements for titanium, titanium alloy, aluminum, and aluminum alloy forged fittings, both socket-welding and threaded ends. ... -
ASME STP-PT-086
Abstract: INTRODUCTION The objective of this study was to evaluate the effects on rivet properties based on maximum hot rivet driving temperatures, plate fit-up, rivet-hole clearances and joint tightness. The most urgent need was ... -
ASME B16.5
Abstract: General (a) This Standard covers pressure–temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings. Included are (1) flanges ... -
ASME B30.2
Abstract: Volume B30.2 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of hand-operated and power-driven overhead and gantry cranes that have a top-running singlegirder or ...