درباره ما
ASME - ASME International: Recent submissions
Now showing items 201-220 of 1083
-
ASME A18.1
Abstract: Equipment Covered by This Standard. This safety Standard covers the design, construction, installation, operation, inspection, testing, maintenance, and repair of inclined stairway chairlifts and inclined and vertical ... -
ASME B16.25
Abstract: General This Standard covers the preparation of buttwelding ends of piping components to be joined into a piping system by welding. It includes requirements for welding bevels, for external and internal shaping of heavy-wall ... -
ASME QME-1
Abstract: This Standard provides the requirements and guidelines for the qualification of active mechanical equipment whose function is required to ensure the safe operation or safe shutdown of a nuclear facility. In addition to ... -
ASME A112.6.2
Abstract: This Standard covers framing-affixed supports (i.e., carriers), with or without concealed tanks, including combination carriers and fittings, for off-the-floor plumbing fixtures (i.e., water closets, urinals, bidets, ... -
ASME B31P
Abstract: INTRODUCTION This Standard provides requirements for heat treatment of piping assemblies that meet the requirements of ASME B31 Code Sections. These requirements apply to (a) preheating (b) postweld heat treatment (PWHT) ... -
ASME AG-1
Abstract: This Code provides requirements for the performance, design, fabrication, installation, inspection, acceptance testing, and quality assurance of equipment used in air and gas treatment systems in nuclear facilities. PURPOSE ... -
ASME B16.34
Abstract: General This Standard applies to new construction and covers pressure–temperature ratings, dimensions, tolerances, materials, nondestructive examination requirements, testing, and marking for cast, forged, and ... -
ASME B16.20
Abstract: This Standard covers materials, dimensions, tolerances, and markings for metal ring-joint gaskets, spiral-wound metal gaskets, metal-jacketed gaskets, and grooved metal gaskets with covering layers. These gaskets are ... -
ASME A112.19.3
Abstract: This Standard covers plumbing fixtures made of stainless steel alloys and specifies requirements for materials, construction, performance, testing, and markings. Note: The term “corrosion-resisting steel” is ... -
ASME A17.2
Abstract: This Guide covers recommended inspection and testing procedures for electric and hydraulic elevators, escalators, and moving walks required to conform to the Safety Code for Elevators and Escalators, A17.1-1955 and later ... -
ASME B18.18
Abstract: This quality-focused Standard establishes in-process and final inspection requirements for fastener products as well as a receiving inspection plan for fastener purchasers. This Standard identifies four categories, recognizing ... -
ASME STP-PT-088
Abstract: INTRODUCTION Duplex stainless steels are thermo-mechanically processed in order to produce microstructures that contain an equal balance of ferrite and austenite. The balanced microstructure affords duplex stainless steels ... -
ASME B32.100
Abstract: Scope: This Standard establishes a preferred series of metric thicknesses, widths, and lengths for flat metal products of rectangular cross section. The thicknesses and widths shown in this Standard are also applicable to ... -
ASME B16.23
Abstract: Scope: This Standard establishes specifications for cast copper alloy solder joint drainage fittings, designed for use in drain, waste, and vent (DWV) systems. These fittings are designed for use with seamless copper tube ... -
ASME A112.19.19
Abstract: Scope: This Standard establishes requirements and test methods pertaining to materials, significant dimensions, and functional performance for vitreous china nonwater urinals, including those with an optional drain-cleansing ... -
ASME STP-PT-080
Abstract: Scope: FOREWORD The purpose of this project is to develop isochronous stress-strain curves and external pressure charts in the creep regime for 9Cr-1Mo-V steel taking into consideration updated information and data available ... -
ASME B18.16.6
Abstract: Scope: This Standard covers the complete general, dimensional, mechanical, and performance requirements (proof load, prevailing torque, and torque-tension) for carbon steel, inch series nylon insert locknuts of grades N2, ... -
-
ASME B31.8S
Abstract: Scope: This Code applies to onshore pipeline systems constructed with ferrous materials and that transport gas. The principles and processes embodied in integrity management are applicable to all pipeline systems. This ... -