درباره ما
ASME - ASME International: Recent submissions
Now showing items 181-200 of 1083
-
ASME B16.10
Abstract: General Application. This Standard covers face-to-face and end-to-end dimensions of straightway valves, and center-to-face and center-to-end dimensions of angle valves. Its purpose is to ensure installation ... -
ASME PTC 34
Abstract: The rules and instructions given in this Code apply to all waste combustor systems with energy recovery, but the Code cannot detail a test applicable to every variation in the design of waste combustor systems. In every ... -
ASME PCC-3
Abstract: The risk analysis principles, guidance, and implementation strategies presented in this Standard are broadly applicable; however, this Standard has been specifically developed for applications involving fixed pressurecontaining ... -
-
ASME B31.9
Abstract: Coverage and Application. This Code Section has rules for the piping in industrial, institutional, commercial, and public buildings, and multi-unit residences, which does not require the range of sizes, pressures, and ... -
ASME Y14.100
Abstract: This Standard establishes the essential requirements and reference documents applicable to the preparation and revision of manual or computer-generated engineering drawings and associated lists, unless tailored by a specialty ... -
ASME PTC 47.1
Abstract: This Code applies to ASUs of any size, in either a single-train or multitrain configuration. It can be used to measure the performance of an ASU in its normal operating condition, with all equipment in a new, clean, and ... -
ASME B18.13
Abstract: This Standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS. SEMS products may include screws, tapping screws, or bolts in sizes No. 0 ... -
ASME NQA-1
Abstract: INTRODUCTION This Standard is to be applied to any structure, system, component, activity, or organization that is essential to the safe, reliable, and efficient performance of a nuclear facility and any activities independent ... -
ASME PTB-12
Abstract: PURPOSE AND USE This guideline provides a recommendation and potential guidance to address observed gaps in data and recordkeeping practices that are currently prescribed in the ASME pipeline standards B31.8, B31.8S, and ... -
ASME PTC 4.3
Abstract: This Code applies to all air heaters used in industrial application, e.g., air heaters servicing steam generators and industrial furnaces. This specifically includes (a) combustion gas-to-air heat exchanger including air ... -
ASME A112.1016
Abstract: This Standard applies to automatic compensating valves intended to be installed at the point of use, where the user has access to flow or final temperature controls, and where no further mixing occurs downstream of the ... -
ASME PTC 40
Abstract: The application of this Code is limited to the process and equipment employed to remove sulfur dioxides from flue gas or other sulfur-dioxide-laden gas streams. The methodology described in this Code may be adapted for ... -
ASME B31J
Abstract: General The ASME B31 Code for Pressure Piping and the ASME Boiler and Pressure Vessel Code, Section III, Nuclear Components, Subsections NC and ND piping rules require the use of stress intensification factors (SIFs or ... -
ASME B30.16
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement related equipment. For the ... -
ASME B16.49
Abstract: General This Standard covers design, material, manufacturing, testing, marking, and inspection requirements for factorymade pipeline bends of carbon steel materials having controlled chemistry and mechanical properties, ... -
ASME BTH-1
Abstract: This Standard provides minimum structural and mechanical design and electrical component selection criteria for ASME B30.20, Below-the-Hook Lifting Devices. The provisions in this Standard apply to the design or modification ... -
ASME B16.29
Abstract: This Standard for wrought copper and wrought copper alloy solder-joint drainage fittings, designed for use with copper drainage tube conforming to ASTM B306, covers the following: (a) description (b) pitch (slope) (c) ... -
ASME B89.1.14
Abstract: This Standard provides the essential requirements for the specification, verification, and calibration of calipers, including vernier, dial, electronic digital, and specialty calipers. ISO 13385-1 provides for the international ... -
ASME B18.16.6
Abstract: This Standard covers the complete general, dimensional, mechanical, and performance requirements (proof load, prevailing torque, and torque-tension) for carbon steel, inch series nylon insert locknuts of grades N2, N5, and ...