درباره ما
AIA/NAS NAS725
SCREWS, MINIATURE - Rev 3
Year: 2011
Abstract: This specification establishes the requirements for externally threaded fasteners of diameters from .30 UNM (.0118 in.) to 1.40 UNM (.0551 in.) inclusive, which fall within the classification of Miniature Screws and which are designed to be assembled with tapped holes or nuts and driven by means of a jeweler's type screwdriver. There is only one class of thread established: this is with zero allowance on all diameters. All tolerances governing limits of size are based on functions of the pitch only and apply to lengths of engagement from two-thirds to one and one-half times the nominal diameter.
Show full item record
| contributor author | AIA/NAS - Aerospace Industries Association of America Inc. | |
| date accessioned | 2017-09-04T16:53:36Z | |
| date available | 2017-09-04T16:53:36Z | |
| date copyright | 04/29/2011 | |
| date issued | 2011 | |
| identifier other | WWDQJEAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;quein/handle/yse/117052 | |
| description abstract | This specification establishes the requirements for externally threaded fasteners of diameters from .30 UNM (.0118 in.) to 1.40 UNM (.0551 in.) inclusive, which fall within the classification of Miniature Screws and which are designed to be assembled with tapped holes or nuts and driven by means of a jeweler's type screwdriver. There is only one class of thread established: this is with zero allowance on all diameters. All tolerances governing limits of size are based on functions of the pitch only and apply to lengths of engagement from two-thirds to one and one-half times the nominal diameter. | |
| language | English | |
| title | AIA/NAS NAS725 | num |
| title | SCREWS, MINIATURE - Rev 3 | en |
| type | standard | |
| page | 4 | |
| status | Active | |
| tree | AIA/NAS - Aerospace Industries Association of America Inc.:;2011 | |
| contenttype | fulltext |