درباره ما
AIA/NAS NAS9800
HEAD PROTRUSION GAGING, 100° FLUSH HEAD FASTENERS, GAGE BLOCK, GAGE DIAMETERS AND STYLUS - Rev 2
Year: 2010
Abstract: This specification defines the inspection criteria and requirements in inches for gaging the head protrusion values for 100º flush head rivets and threaded fasteners;
Type A - Rivets (i.e. NAS525).
Type B - Externally threaded 100º Full Flush Head fasteners (i.e. NAS1580).
Type C - Externally threaded 100º Reduced Flush Head fasteners (i.e. NAS1581).
This specification includes the individual flush head protrusion gage block diameters, the method for determining applicable individual gage block diameters and acceptable gage diameter wear factors.
Recommendations for improvement and/or corrections to this standard practice document should be directed to an NASC Representative or to the National Aerospace Standards Committee.
Specifications herein, of issue in effect on date of price inquiry, are a part of this specification to the extent indicated. In the case of conflict, the requirements herein shall take precedence.
This Standard Practice takes precedence over documents referenced herein.
Type A - Rivets (i.e. NAS525).
Type B - Externally threaded 100º Full Flush Head fasteners (i.e. NAS1580).
Type C - Externally threaded 100º Reduced Flush Head fasteners (i.e. NAS1581).
This specification includes the individual flush head protrusion gage block diameters, the method for determining applicable individual gage block diameters and acceptable gage diameter wear factors.
Recommendations for improvement and/or corrections to this standard practice document should be directed to an NASC Representative or to the National Aerospace Standards Committee.
Specifications herein, of issue in effect on date of price inquiry, are a part of this specification to the extent indicated. In the case of conflict, the requirements herein shall take precedence.
This Standard Practice takes precedence over documents referenced herein.
-
Statistics
AIA/NAS NAS9800
Show full item record
| contributor author | AIA/NAS - Aerospace Industries Association of America Inc. | |
| date accessioned | 2017-09-04T17:09:54Z | |
| date available | 2017-09-04T17:09:54Z | |
| date copyright | 40512 | |
| date issued | 2010 | |
| identifier other | YOEUEDAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;quein/handle/yse/133402 | |
| description abstract | This specification defines the inspection criteria and requirements in inches for gaging the head protrusion values for 100º flush head rivets and threaded fasteners; Type A - Rivets (i.e. NAS525). Type B - Externally threaded 100º Full Flush Head fasteners (i.e. NAS1580). Type C - Externally threaded 100º Reduced Flush Head fasteners (i.e. NAS1581). This specification includes the individual flush head protrusion gage block diameters, the method for determining applicable individual gage block diameters and acceptable gage diameter wear factors. Recommendations for improvement and/or corrections to this standard practice document should be directed to an NASC Representative or to the National Aerospace Standards Committee. Specifications herein, of issue in effect on date of price inquiry, are a part of this specification to the extent indicated. In the case of conflict, the requirements herein shall take precedence. This Standard Practice takes precedence over documents referenced herein. | |
| language | English | |
| title | AIA/NAS NAS9800 | num |
| title | HEAD PROTRUSION GAGING, 100° FLUSH HEAD FASTENERS, GAGE BLOCK, GAGE DIAMETERS AND STYLUS - Rev 2 | en |
| type | standard | |
| page | 5 | |
| status | Active | |
| tree | AIA/NAS - Aerospace Industries Association of America Inc.:;2010 | |
| contenttype | fulltext |